Bench Grinders - Recent Questions, Troubleshooting & Support


Request the wiring diagram from the manufacturer/distributor.

Bench Grinders | Answered on Sep 18, 2019


Usually, 4 wires are multi-directional neutral and earth are usually colours the other 2 are both live and would need to go through a switch. you can of course put the other live in a cover and just use one live wired as usual into a plug. Make sure the spare wire is well protected ie in a jb with plenty of tape around it

Bench Grinders | Answered on Sep 13, 2019


Google (ctt)(ct-6b)(manual) without parens.

Bench Grinders | Answered on Sep 13, 2019


Depends what parts are needed. Spare parts for something that goes wrong so rarely can be difficult especially if the machine is imported. Some parts will be fairly universal and so fairly easy to obtain - nuts, flanges, abrasive wheels, bearings, capacitor (if fitted) and possibly even the switch and tool rests.

Bench Grinders | Answered on May 26, 2019


Google (Elu)(MWA61W)(manual) without parens.

Bench Grinders | Answered on Jan 27, 2019


Quick fix..eliminate switch and hook it up direct. Plug it into a cheap power bar that has an overload switch. Use THAT switch to control on/off on grinder

Bench Grinders | Answered on Nov 08, 2018


2 wires are not needed to use they are the wires of an supression capacitor on the switch then there are 2 wires from your power cable and 2 that goes to your motor that 4 you only you have to use you can also connect the 2 wires from the s-capacitor with te wires on the motor together thats is how its also correct, (but best is to remove it because its only for suppression for FM ukw radio signals and everybody has DAB+ and the change to have short-circuit is reduced.

Bench Grinders | Answered on Jul 11, 2018


WEN is a leading power tool manufacturer. They produce many kinds of power tools. This grinder is just another quality product from them. WEN 4276 bench grinder has got 2.1 ampere motors that can run in a 3450 RPM without load.

Bench Grinders | Answered on Jun 07, 2018


Double that 100mf

Bench Grinders | Answered on Mar 12, 2018


replace the start/run capacitor or repair the centrifugal stating device in the end of the unit

Bench... | Answered on Nov 07, 2017


since this is a vague comment, I have to say that some small grinders just do not do well with blade sharpening. I have one that does the same thing when sharpening a blade. It is just too small, horsepower wise, to handle the job.

Bench Grinders | Answered on Sep 29, 2017

Not finding what you are looking for?
Bench Logo

40 questions posted

Ask a Question

Usually answered in minutes!

Top Bench Grinders Experts

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

2010 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Are you a Bench Grinder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...