Belling Washing Machines - Recent Questions, Troubleshooting & Support

The door latch might be broken or loose here.

contact your local dealer about it we have no code list for that brand

there is a small tube that runs up the out side of the tub to activate the water control solenoid when a set water level is reached possible that the hose id leaking could be hot water inlet is leaking after the outlet into the tub

from the factory info,,, door lock is activated because of the water level in the machine. Drain the water by running the Pump or Spin programme. • Machine is heating up the water or it is at the spinning cycle. Wait until the programme completes. • Child lock is engaged. Door lock will be deactivated a couple of minutes after the programme has come to an end. Wait for a couple of minutes. when in doubt unplug for 5 minutes and plug back in and see if that resets the unit. Hope this helps a little.

have to take top off and go at it from inside

I have good luck with RepairClinic.com