Will my belkin g wireless router model f5d7234-4
Step 1 : Check the IP Addressof the Xbox And take a note of it
Step 2 : Open RSP By typing 192.168.2.1 on the Address bar of the internet explorer
Step 3 : On the left side Click Firewall
Step 4 : Leave the Password blank and click Submit
Step 5 : Disable it And Apply Changes
Step 6 : On the left side Under Firewall Click DMZ
Step 7 : Add the IP Address of the XboX in DMZ
Step 8 : Click Apply Changes
Step 9 : Restart the Router
Step 10 : Test the Connection
8/18/2018 6:42:52 AM •
Belkin...
•
Answered
on Aug 18, 2018
Belkin G wireless Router
Do you have an all-in-one router from Comcast? For example, do you have the cable (RF) line and your PC plugged into the Comcast router? If so, unplug your PC from the Comcast router and connect the Internet port of the Belkin to the ethernet port on the Comcast router. Then plug your PC into the LAN port on your Belkin.
[PC] ---> [Belkin] ---> [Comcast] ---> Internet
Once you have connected your boxes as displayed above, you will need to power everything off and bring up the boxes in the following order:
Comcast (wait 60 seconds)
Belkin (wait 60 seconds)
PC
If you cannot get out to the internet, momentarily press the reset button on the back of the Comcast box. Comcast routers are weird. A poweroff should reset the router but I have seen a few times where nothing works until the reset button is pressed (this is also recommended by Comcast).
I hope this helps.
Dave Grannas
8/18/2018 6:10:15 AM •
Belkin...
•
Answered
on Aug 18, 2018
How to conect a wireless router to a regular modem
If your modem/router has a USB connectivity, you can connect it via USB. Else you will have to buy an Ethernet PCI Card, which wont cost you much.
I hope this solves your problem. Good Luck !
Kindly Accept my Solution.
Regards,
Arjun
8/16/2018 7:05:10 PM •
Belkin N...
•
Answered
on Aug 16, 2018
How to install my belkin
HI Gilbert,
Can i have the brand name of the modem , Your Internet service provider name , so that we can configure the router with using the CD.
We have another method to configure the router that is manual configuration method.
Thanks & Regards,
prema
What is the password for a belkin router F9K1123v2
If you are asking what the default credentials are to log into the admin panel of the router, then the options are below.
Default usernames: admin, Admin, [blank]
Default passwords: admin, password, [blank]
If you are asking for the Wi-Fi password, that is unique to the user who initially set it up. You can reset the router but following the manufacturer instructions and holding the reset button down in the back. This will erase all settings on the router.
How do I change the password for guests on my Belkin wifi
Either get the original setup disc to do it or you have to get the IP address of your router and type it into a web browser on your computer. The login for your router to get into its interface may be on the bottom of your router or google the specific Belkin model to find it. Then you will have an area with your WiFi and guest WiFi info you can change.
Hi my Belkin N300 wireless moden router works for
If the green light is one of the port lights, then your network is switching into 10mbs (Orange = 10mbs, Green = 100mbs) - it may be a dodgy cable but more likely a faulty network card in your PC.
5/19/2018 1:40:04 PM •
Belkin N...
•
Answered
on May 19, 2018
Problem with router; Msn gets disconnected frequently.
It could be the proxy or firwall setting in the router.
you need to open the router page and check the firewall and proxy setting ..
or you can download the tool from the below site
www.ultrareach.com/
and it will take off all proxy setting and you winows messenger should work.
This should help you identifing if its a proxy issu.
THanks & all the best
5/17/2018 12:32:25 PM •
Belkin...
•
Answered
on May 17, 2018
I want to set up
Some routers won't allow wireless repeating (which I think is what you are trying to do). Some powerline adapters would be the easiest way to solve this as they work through your electrical cables. Plug one in where you already have a network connection and the other where you want it. You can then connect the cable to the N300 (provided it has multiple ethernet ports) and then connect the rest of your devices to the remaining ports. You'll need to do some googling to configure the router correctly.
Problem with belkin router
assuming you are connecting wirelessly; you may have to check that the router is allocating ip addresses automatically to your pc's.
connect one of your pc's to the router via the RJ45 network cable that was supplied and not wirelessly and type 192.168.2.1 in your internet browser, this will take you into the routers setup menu.
Look for a menu refering to 'DHCP' and make sure that this is enabled, then look for the channel number that the router is using (normally 6 or 11) and make a note as if you are still experiencing signal loss, you can get back into the router and change to any channel between these numbers incase you are getting appliances interfering with the signal, save and exit from the router menu.
disconnect the cable then go to control panel, network connections and right click on the connection you are using whether it is wired or wireles and click on properties.
Look for the line TCP/IP and again click on the line and select properties, then make sure automatically obtain ip address is selected, ok and close window.
Restart the pc's and you should have a connection.
5/5/2018 10:37:29 AM •
Belkin...
•
Answered
on May 05, 2018
HOW CAN I RESET MY NETWORK KEY PASSWORD?
Steps to find a WEP key:
1. Open a browser (the program used to access the internet).
2. Type the following into the address bar of the browser. If using a Belkin router type "192.168.2.1". The address bar is the area where webpages are typed. It is important when typing in that there is NO www. before the numbers, but do put http://
3. If all has gone well this should open a page that says Belkin.
3. There may be the need to login. When using a Linksys if you don't know what the username and password are it may still be the factory settings, and so enter in "admin" for the username and "password" for the password. If using a Belkin router, the factory settings often come with no password, so just click submit without typing in a password.
4. Click on a) "Wireless" or b) "settings".
5. Click on a) "Wireless security" or b) "wireless settings".
6. There should be a page with a WEP key listed.
7. Write it down/copy and use as you wish!
3/21/2018 4:27:41 AM •
Belkin...
•
Answered
on Mar 21, 2018
Not finding what you are looking for?