Belkin Recent Questions, Troubleshooting Help & Support

Susie take a look at window 8 similar problem look at rimshots answer http://www.fixya.com/support/t6138715-belkin_f4u017_7_port_usb

You have a smart chip problem. Your unit is too small that would be cost effective to repair.

check out my web page:

www.storminprotection.com.

I will help you save a few dollars but I think you might need a little bigger UPS then a 550. Try going bigger.

XP does not necessarily automatically configure for wireless. https://www.lifewire.com/automatic-wireless-network-connections-xp-818243 Currently, the only companies offering satellite internet are HughesNet and Viasat. Both providers lease modems with built-in Wi-Fi routers to their customers. While you must use the modem issued by your satellite internet provider, you can use any router you choose. Using an alternate router might enhance your network's performance, but if you'd rather not mess with it, the modems you get with HughesNet or Viasat both come with built-in Wi-Fi routers. https://www.satelliteinternet.com/resources/satellite-modems-and-routers/ https://smallbusiness.chron.com/use-wireless-routers-satellite-internet-52128.html https://community.viasat.com/viasat/topics/belkin-enhanced-wireless-router

Fixing ADSL Not Connected Error for Belkin Modem Router

press red reset button in back for 2 minutes.

you should reboot the router and computer. also, check the connection. may be your router is not working fine. https://www.askprob.com/forums/topic/why-is-my-belkin-router-not-working

Have you tried restarting and resetting the router as well ?

Blue? the n300 colors..... 4 LED Descriptions Router Link LED This LED indicates the connection between the extender and the router or access point. Solid green . Best connection. Solid ambe r. Good connection. Solid red . Poor connection. Off . No connection. Device Link LED This LED indicates the connection between the extender and a computer or mobile device. Solid green . Best connection. Solid amber . Good connection. Solid red . Poor connection. Off . No connection. Power LED Solid amber . The extender is booting. Solid green . The extender is powered on. Off . The extender is powered off. WPS LED Solid green . WiFi security is enabled (WPA or WPA2). Blinking green . A WPS connection is being established. Off . WiFi security is not enabled. Note: If the Router Link LED or Device Link LED is amber or red, Find the Best Location

This is the password or passkey that you normally use to connect to your wireless router.Refer to and follow instructions especially pages 4 and 10 - 12 , 16,17,18, 12 You can use reset to restore back to out the box status.www.belkin.com/support/dl/MAN_F9K1111v1_8820-01079_RevA00_N300_RangeExtendr (2).pdf

Solution: n52te as a mouse

I clicked google then "Bilkin support" no quotes. found them in 1 second flat then search box there, your model and go this, (spoon feed day) https://www.belkin.com/us/search?text=f8m744

mcdevito75 here, The orange light could mean a weak connection to the internet, shut down and try to re-connect.

This is normal - indicates internet traffic. Don't worry about it so long as all the lights are green. The lights will turn orange if there is a fault of any kind.

Hope that helps!

Reset the router, then restart your computer

http://en-us-support.belkin.com/app/answers/detail/a_id/48 I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Solution:

Step 1:
Make sure the that router is connected to your modem with an ethernet cable via the router’s internet (WAN) port.

Step 2:
Unplug the modem from its power source and make sure that it's totally turned OFF. Then re-plug the modem to the power source.

Step 3:
Unplug your router’s power supply, wait for 10 seconds and then plug it back in. This will cause the router to reestablish communication with the modem.

If you still cannot browse the web, contact your Internet Service Provider (ISP).

Solution:

Step 1:
Make sure the that router is connected to your modem with an ethernet cable via the router’s internet (WAN) port.

Step 2:
Unplug the modem from its power source and make sure that it's totally turned OFF. Then re-plug the modem to the power source.

Step 3:
Unplug your router’s power supply, wait for 10 seconds and then plug it back in. This will cause the router to reestablish communication with the modem.

If you still cannot browse the web, contact your Internet Service Provider (ISP).

Solution:

Step 1:
Make sure the that router is connected to your modem with an ethernet cable via the router’s internet (WAN) port.

Step 2:
Unplug the modem from its power source and make sure that it's totally turned OFF. Then re-plug the modem to the power source.

Step 3:
Unplug your router’s power supply, wait for 10 seconds and then plug it back in. This will cause the router to reestablish communication with the modem.

If you still cannot browse the web, contact your Internet Service Provider (ISP).

Site reference link:
https://www.belkin.com/us/support-article?articleNum=56519