How to tie knot using handy stitch machine
When you get to the end cut the threads long enough to be able to tie.
From the wrong side of the fabric, if you pull the thread slightly you will see the a loop from the top thread, pull this, so now both threads are on the wrong side, tie a square knot and cut close to knot, you can also put a drop of fabric glue on the knot to help secure it.
Hope this helps, and please rate if helpful or not
Moni
I need a replacement steamer head it snapped off the hose
I think there is a lot about looking at things - like how Sanders see the forest from the boat. Ventress similarly is looking around the room peering into the recesses (alcoves) and is trying to make out if they contain any shapes - but the whole encounter seems analogous for how he is also appraising Sanders and what he might be hiding. Lifeogy Hub for Daily Needs
I need a replacement hose for my tobi steamer
Can't you cut the hose so it is even across, and level? Reaffix the hose to the steamer portion. Just remove the old attached hose from the end of the handle, clean it and reaffix the freshly cut end into the handle once again.
My handy stitch will not
Might be off timing, check that needle is right direction, timing sometimes on these units are thrown off easy
How to fix my shaver?
try going to their web site to see if they have a parts picture, if they do the diagram will probably resemble what the shaver looks like with the parts separated and numbered so you can buy just that part, it should give you an idea of what it looked like before. I know they have sewing machine pictures like that so I am hoping they have them for shaver too! good luck hope it helps.
Not finding what you are looking for?