Apple Televison & Video - Recent Questions, Troubleshooting & Support

Assuming your tv has an HDMI port, you simply need an HDMI cable from the Apple TV to the LG. On the LG, choose the HDMI input you connected to, and follow the prompts to set up the Apple.

thru your account

Hi there, I haven't had this issue on my iPhone 4 running iOS 5. However, I do click my lock after the video starts playing. Have you tried this? Perhaps locking yourself rather than letting the phone may be an easy fix. Hope this helps! If not please advise which iPhone and os version.

If you have just one Audio Out RCA jack then the camcorder only recorded in MONO, so all you would need to do is either plug the wire coming from your single Audio Out jack into the left or white input jack of your Capture Device which may have an option in the software program to set it to recieve audio in MONO, or you can buy a RCA Jack Splitter that goes from a single Female RCA jack on one end and 2 Male RCA Jacks on the other end. Then you take the end of the Splitter with 2 plugs and plug one of them into the White Jack and the other into the Red Jack on your Capture Device, and the other end with just one plug should plug into the cord coming from the Black Jack on your Camcorder.

Contact comcast customer service

it might be your Flash player. Just update your Flash player to latest one. It depends on your viewing time, also. If a lot of them watch same video at same time, it slows down the server or just freezes it.

Apple store in shopping mall can give assistance. Possible charging indicator: https://support.apple.com/guide/watch/charge-apple-watch-apd2b717523a/watchos

Hi Donna,
I did some research and it was difficult to find an exact answer online searching some forums and FAQs on websites.
I contacted DISH through their chat feature and they recommended you contact their support at 1-800-333-3474
- in general you should be able to go inti the Apple TV settings and pick your “provider” to “marry” the services together.
Certain channels may require separate activation codes such as HBO GO where you have to actually go to www.hbogo.com/activate to complete the registration

To switch the tv provider in iOS: open the settings app, then “TV Provider” there you can log out, and select what iOS apps have permission to access that provider login.

In Apple TV: Settings app, Accounts, then under ACCOUNTS select TV Provider.

For DIRECTV apps that you can download to iOS or tvOS make sure you get the right one. There is Directv app for controlling the satellite receiver and accessing account. The. There is the digital device based DirectvNOW app, which is used if you do not have a receiver and just stream content only.

on your TV remote press the aspect button to change picture size

You can download Pokemon from this website. It is very good site to for pokemon series...
http://download-pokemon-episodes.edogo.com/

What is this

Answer may be late but try other devices on the same input. Try another HDMI cord. Try another input for the Apple TV. Try it on a different tv display.

Last do a hard reset. If that does not work try taking it to the Apple store for support.

https://help.pbs.org/support/solutions/articles/12000006913-how-do-i-activate-pbs-passport-on-my-apple-tv-

http://www.gadgetguy.com.au/freeview-fv-now-apple-tv-devices/ install freeview - fv app to device https://itunes.apple.com/au/app/freeview-fv/id1157860275?mt=8

notify provider

si se puede usando un dispositivo iOS como un ipad o iphone conectado atraves de airplay a apple tv

At the bottom of the remote is a small button that can be pressed by a pin or pen. Press it and the battery will pop out. Replace the battery and you will have a working remote

Turn demo off in tv menu options