Alpine Logo

Alpine Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 977 Products
  • 16K Answers
  • 529K Views

Unless other specified in paperwork, all Alpine receivers are 4ohm capable only.
Now yes there are exceptions, but not many.
Now for amp almost all alpine amps can be run in several different resistances.
Basically for sure 4ohm, now depending on model some have abilities to go as low as 1ohm stable. But for most 2 ch alpine non special amps are all 4ohm and most 2ohm capable.
Now better models can do things such as run 2,3,4 ch. And some can even get to .5 ohm loads stable.

Alpine Car Audio... | Answered on Oct 16, 2019


Do you have an external amp? Give me more info on stereo going in, and what it does do.

Alpine Car Audio... | Answered on Oct 16, 2019


I have a Alpine d300 brain and other acc
9092794466

Alpine IVA-D310... | Answered on Sep 29, 2019


i need a brain unit 4 an alpine IVA-C800 please help!

Alpine IVA C801... | Answered on Sep 29, 2019


NEW Alpine INE-W940 Head Unit - YouTube

? 4:49
https://www.youtube.com/watch?v=1wv1LzdUYiM
Sep 5, 2013 - Uploaded by Mx Car Audio
I recently bought the Alpine W940 and the bluetooth that connects to ... A simple reboot at the shop and the ...

[PDF]INE-W940 INE-NAV-40 INE-W940S - BrandsMart USA

www.brandsmartusa.com/pdfs/manuals/20181335.pdf
sp?ciales, de l'actualit? d'Alpine, et vous aurez une chance de remporter des prix. Gracias por adquirir ... MANUAL DE OPERACI?N .... Listening to the Radio .

In Case Of Difficulty - Alpine INE-W940 Owner's Manual ...

www.manualslib.com > ... > INE-W940 > Owner's manual

Alpine Car Audio... | Answered on Sep 16, 2019


Alpine w960, best speakers for this unit? oui

Alpine Cars &... | Answered on Sep 13, 2019


I would think a 1000 watts would be enough for 2 10's.
You can hook up two dual voice coil subs a few different ways.
First thing I would check for is what ohmage your amp is rated for.
You don't want to push a lower ohmage than what your amp is rated to handle.
That is a good way to overheat & ultimately fry your amp.
After that, you can wire your subs accordingly.
If they are dual 2 ohm subwoofers, you can wire each of them as a 4 ohm load, 2 ohm load or even a 1 ohm load.
I would personally go by what the amp is ratted for.
Remember though, the lower you run the ohmage, the better base responce & harder the hit you will get.

Alpine Car Audio... | Answered on Jul 10, 2019


manualslib.com is a 100% free online manual for any manual needed and if you want to buy there is that option to or simply just print out the pages if you have that much ink..but just an option...Hope this helps...

Alpine Car Audio... | Answered on Jun 29, 2019


Make sure even thought the wires are the same color that your car color code also matches the color code of the Head Unit if not stock radio then the color code would be in your cars manual book or find it online in the image section of the browser you are using or better yet just order your self the radio adapter for your cars model for that type of head unit your installing or troubleshooting in your case and make sure all wires and positive wires are hooked up properly because some devices will not work if all the wires are not wired correctly meaning left terminal to left and right terminal to right speaker and positive and negative wires installed correct as well.. Hope this helped..

Alpine Car Audio... | Answered on Jun 29, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Alpine Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

The Knight
The Knight

Level 3 Expert

76171 Answers

Bill Boyd

Level 3 Expert

53755 Answers

Are you an Alpine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...