Akai Televison & Video - Page 6 - Recent Questions, Troubleshooting & Support

A quick search showed this site has a manual for your Akai. http://www.findproductmanuals.com/lp/?category=Owners&utm_source=google&utm_medium=cpc&utm_term=magnavox%20manuals&utm_network=d&utm_pos=none&utm_campaign=dsiplay

Check your wire connections. HDMI or rca. If you see the channel selection still or if you can select video sources then it’s not the screen itself but the connections

T'Con board fault. If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

Power supply issues, could be bad capacitors.

Put tv on air, connect antennae to the coaxil input on back of tv.
You can also go to tv's menu and find the "autoprogram" feature and select it. Let it run thuroughly until it is done searching all available channels. Tv. may need to be on channel 3 or 4 to use the antennae/converter box

Either the convergence chip has gone bad or the Focus block is bad. In any case,you will need to consult with a professional technician to solve this problem

not sure if this link will help you out but have a look. How to unlock child lock Akai CT 1411 Google Search

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://homenol.blogspot.com/ http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.

make sure the caps you installed are the exact replacements. Changing voltage capacity or timing will cause the circuit to fail.

Sounds like power regulator board fault. If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ You should be something in electronics to gasp the essence of the posts there.

Maybe the plasma controllers are gone.

It's not the fuse. Chances could be your PSU

Sorry to hear of your TV's illness. Internal protection due to electronic fault. A TV-repair technician can check it. Electronic components fail for many reasons.

If replacing the adapter did not solve the issue, then it sounds as if your socket in the player needs re solder, or there is a break in the board. Either way you would have to get into the player and have the necessary soldering skills to do the work.

1st your power supply needs replaced. But you could have issues with the sustain boards and or your panel that is causing your power supply to fail. once you replace your power supply you should be able to power up the set, but if you don't get a picture then you will have to trouble shoot the sustain boards and panel.

If this is the model with a light engine, then there lies your problem. Your filters in the engine are burning up. The light engine will need to be replaced. If this is an older model with the 3 tubes you might be able to adjust your red green and blue tubes to get the picture back in good standings. Please keep in mind when asking questions to include both the make and model number. This will help us help you more efficiently.

This is only a guess but pressing Menu on the remote then up or down to Setup followed by Key Lock to turn On or Off. Hope this helps..........

Check your manual or web site for specs on unit.