Advent Televison & Video - Popular Questions, Answers, Tips & Manuals

It sounds like you're experiencing an issue with your Advent DVD player not turning off properly. Here are a few things you can try to resolve the issue:

1. Check the remote control: Make sure the remote control is not accidentally turning on the DVD player. Try removing the batteries from the remote and test the power button on the DVD player again.
2. Check the power cord: Make sure the power cord is securely plugged into the DVD player and the wall outlet. Also, check that the outlet is working properly by plugging in another device to see if it powers on.
3. Unplug the DVD player: Try unplugging the DVD player from the wall outlet for a few minutes, then plug it back in and test the power button again.
4. Try a soft reset: If the above steps don't work, you can try performing a soft reset on the DVD player. To do this, unplug the DVD player from the wall outlet, wait a minute, and then plug it back in. Press and hold the power button on the DVD player for about 10 seconds, then release it. The DVD player should turn off.
5. Check for a hardware issue: If none of the above solutions work, the issue could be caused by a hardware problem with the DVD player. In this case, you may need to contact the manufacturer or a repair professional to have the DVD player serviced.

It's possible that one of the above solutions will resolve the issue, but if not, it's best to consult the DVD player's manual or contact the manufacturer

Go to the Advent support site and see if they have a manual for download. http://www.adventproducts.com/support

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

Check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. Surf the site with patience. http://electro-medical.blogspot.com/ http://electronicshelponline.blogspot.com/

ours did the same thing but kept the dvd, we had to replace it, dvd player gears went...

tried with reset doesn't work, ok it could be the IR sensor at the front panel of the tv doesn't work. but before you replace it you need to ensure if your remote controller is working. have you tried to check the remote with camera trick just to know if the remote controller is sending light to the IR sensor of the tv.

This is tough to diagnose because it could be the remote or the television. There are no listings for the remote. Check to see if there is a light on the remote that comes on when you press a button to show that it is sending. Check and see if there is a light on the monitor that shows if it is receiving a signal from the remote. Usually the remote fails first. You might want to try a universal smart remote to see if it can be programmed to activate the television.

Try these codes.0176 0922

HelloWhat is the fault with audio out with your tV? Your problem post is not clear. Please give me some more details about the sound problem to your Tv. OK.

Hello,

we don't stay in the same vicinity, so I don't know precisely where you can get the power cod in your area. But you can order for it online from any of the below links, or you can get the power cord from any electronics parts store in your area.

http://www.amazon.com/Cables-Go-03134-Universal-IEC320C13/dp/B00005113L/ref=sr_1_fkmr0_1?ie=UTF8&qid=1301774918&sr=1-1-fkmr0

http://cgi.ebay.com/AC-Power-Cable-Cord-2-RIGHT-ANGLE-Wall-Mount-TV-LCD-/140489611572?pt=LH_DefaultDomain_0&hash=item20b5d55934

http://cgi.ebay.com/GENUINE-Samsung-LCD-TV-POWER-CORD-AC-plug-10A-125V-/250797749290?pt=LH_DefaultDomain_0&hash=item3a64b5f42a

I hope you find the above helpful........ Let me know if you need further assistance.

Good luck.

Your t.v. is probaly a little wet!
Or the plug needs to be twisted in and it will be fully clear! =)

U have vertical lines for a few second.That mean u tv have a dead board call the T-CON decoders is board.This T-CON decoders board sit at the bottom wright in the middle of the LCD screen panel.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish T-CON decoders board for the replacement.

Hi,

Please check the bellow links related to your issue:-

http://www.ehow.com/how_4868326_hook-up-dish-network-satellite.html

http://www.howtodothings.com/electronics/how-to-hook-up-a-dish-network-satellite

Please get back to us if you have any further query or else accept the solution.

Thanks for contacting fixya.com

I have the same problem. After power on I just get a blue screen and no sound.

I can get a piture and sound if i do the following.

Leave the TV on for a minute or two then unplug the power while still on. Plug back in and power on. I begin to get sound, repeat and then I get a picture for a few moments then blue again. Repeat and then I get constant picture with defunct colors. I then use the remote to power off and back on an color corrects. sometimes have to repeat this as well. Sometimes it takes unplugging, replugging, and powering on up to five times before i can sit down to watch tv.

Hello ! It sounds like you are experiencing some issues with your TCL TV. It's great that the backlight lights are working fine. The blinking *********** light and white screen definitely indicate a problem. One possible issue could be with the internal circuitry or the display panel itself. It's best to contact TCL support or a professional technician to diagnose and fix the problem. In the meantime, you can try power cycling the TV by unplugging it for a few minutes and then plugging it back in. As for uploading a video, you can try connecting your device to a computer and transferring the video file that way. Alternatively, you can upload the video to a platform like YouTube and share the link for others to view. I hope this helps!

Put the batteries back in and aim the front ot the remote at the front facing selfie camera on a smartphone. Press a button and you should see a flash. If no flash, the remote has failed. If there is a flash, the television IR module or main board has failed.

Telefunken Replacement TV Remote TLED-26FHDPA

Soundtech https://soundtech.co.za > telefunken-replacement-tv-rem... Telefunken replacement remote compatible with TV models: TLCD-29FHDP TLCD-32FHDA TLCD-32HDA TLCD-37FDHA TLCD-37FHDA TLCD-39FHDP TLCD-40FHDC TLED-26FHDPA ZAR 199.00 ..

It appears that there could be miscommunication. As of my previous update in January 2022, Matertech doesn't seem to be a commonly known term or corporation. On the other hand, if you're talking about "Google," it's a well-known worldwide technological corporation that specializes in internet-related services and goods, such as search engines, cloud computing, online advertising technologies, software, and hardware. Google's official website or an internet search utilizing one of the search engines like Google itself are usually the easiest ways to get information about Google. If "Matertech" relates to a particular thing or idea, further information could be helpful in order to provide a more precise answer.

Press the red button again to toggle off.

Unfortunately you will have to purchase a remote control for it. All menu systems are within the setup display, all of which are controlled with the remote.They may be available on eBay.Andrew found the link.

Gentle Cleaning: Unplug the radio and remove any batteries if applicable. Dampen a soft cloth with warm water (you can add a small amount of mild soap if needed). Wipe down the sticky areas on the cover gently. Avoid using excessive force or abrasive materials. Dry the cover thoroughly with a clean, dry cloth. Sticky Residue Removal: If the stickiness persists, you can try using isopropyl alcohol (rubbing alcohol) or white vinegar. Dampen a cloth with either alcohol or vinegar. Gently rub the sticky spots on the cover. Wipe off any residue with a clean, dry cloth. Avoid Harsh Chemicals