Aastra Telecom Lands Phones - Answered Questions & Fixed Issues

Question edited for clarity. Question moved to make model category from Computers. There doesn't appear to be an easy reset method in the manual. Try disconnecting the power adapter for 2 minutes or perhaps overnight. You may need to open it up and disconnect the backup battery to effect a reset. You will lose saved numbers and message. https://www.google.com/search?q=vista+390+phone+factory+reset ..

A 9116 N has a power brick that needs tone plugged in to it. They are usually a black power brick. Without the brick there is no display If you are referring to no caller I'd. That is a function that you have to ask for from your provider. A blank screen usuall has a funny weak ring also. If you have a grey power supply look at the voltage on the brick if it say that there is ACvoltage output. It is not the correct one. You need to have a DC voltage output on that type of phone

This can usually be done via your phone system. However you can program each phone independently by IP'g into each phone. Hope this helps!

None of the phone numbers I have to delete this annoying problem work anymore. Is there another solution out there?

probably means that you either have a missed call or message on your machine try deleting the call history and deleting all old messages. that might turn it off

You apparently have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

The cable from the base unit to the handset may be faulty or not properly inserted,

were you able to get this working? hat did you have to do?

www.aastrausa.com

All incoming calls get a busy signal

You will need to call your provider and have them set your password or PIN number. But try your 7 digit phone number for the PIN number first

Each ring is 6 seconds. Phone your phone provider and ask them to set the rings to 36 seconds for 6 rings

Sent yourself a message from another phone then delete it with 3 3 7. That should do it

Just send yourself a message from a different phone and delete it then once deleted hit 3,3,7

I would just use a Y connector.

If there is a volume switch on your phone then while it is ringing (call the number from a cell or something) and as it is supposed to be ringing. Just hit the right arrow to turrn it up. Hope this helps. P.s. it has to be ringing when you are turning it up

You can't. Try your 7 digit phone number and if that does not work your provider will have to reset it. But they may charge you for it hope this helps

Ask your provider to change your voicemail to pick up in36 seconds instead of 18. Each ring is 6 seconds. Hope this helps

Your provider will have to set it up for u it usually is very expensive. But google conference call and you can find a 3rd party conference company that can usually give a far better rate than your provider hope that helps

Google Astra phone manuals. Then you can look it up. Hope that helps