3Com Computers & Internet - Page 9 - Recent Questions, Troubleshooting & Support

Try this http://www.fixya.com/support/r11153882-general_routers_reseting

Jusst updare your router and you are done.No need to do in the computer(s) is just for your router.

Try here GENERAL ROUTERS RESETING

Press F2 on start up. Change BIOS settings

Are you saying that the phone boots up and has the extension on the display but when called by another phone it is busy?

Hi Chirag,On the web interface, use1 Click System Maintenance > Purge Data.2 Click Purge DatabaseThis ll do fact reset.HTH-Karthik.

You can't web to a 3102 phone, only the phone system. If you don't know what the IP address is on the phone system, you will have to get a serial cable (null modem cable) DB9 male to DB9 female and connect to the console 1 of the phone system. You will need a terminal emulator program and connect at 9600, 8, none and 1 for the settings. Type nbxIpConfig (case sensitive) and hit enter. The IP address will then be shown. If this is not what you were asking, please explain.

Yes, press the feature button and then enter 889. This will restrict the NBX system from sending out your Caller ID information for all calls. You will have to disable this by doing the same thing if you want to get your outbound caller ID back. Feature 890 will restrict the NBX system from sending out your Caller ID information for this call only.

You can. There's a MOH jack on the face of the system controller where the ethernet line is plugged in.

Carl