Questions & Answers for: zip 100 format

Zip drive 100, USB won't read my files anymore After getting a new computer with Vista, I read and backed up my files just fine for about a month. Now, one by one the new Zip drive it refuses to read ...

...NEED THE SOFTWARE TO ACTIVE MY WEB CAM ...

...100 MB Zip drive into the new computer. I had WRITE PROTECTED one of my zip disks and now cannot use the password to open it. There is NO OPTION to remove the write protection. When I try to access ...

...than enough. 12 Floppy disks is only 17 Megs far below a 1 GB 12 X 1.44 = 17.28 MB A small Memory Thumb Drive of 100-500 MB would work or even a 100 MB Iomega Zip with Zip Drive would work for

FORMAT A ZIP DRIVE FOR MACINTOSH SYSTEM 7.6.1. I need to copy data from my old mac's hard drive in order to copy it to a new machine. Format on your old Macintosh using standard Mac HFS, then your new

format. I've done this before, forgetting that I needed to double click on the zip file and unzip it to actually bring out the designs. Also make sure the design format is one that your Singer machine

...Zip 100 disks to save data and move it between them. My oldest, a Win95 machine can be revised as a Win98SE but it will lose all data in the process. Currently it feeds a parallel port Zip 100. I ...

...100 MB ZIP drive media should be fine at being at least readable (the Iomega software does not work with Win 7) natively by Win 7 and Vista. Since the drive is recognized I suspect the problem is ...

...zip drive Steve, The 1st thing is to install the correct driver for the 100 on the computer you are using. Is it a Mac or PC? What model of computer is it. I have been able to use the Zip100 disks ...

...zip 100 keep getting message' insert disk' when there is a disk in the drive Assuming you have connected the drive and then restarted the computer with the drive connected and powered on... if it is ...