Questions & Answers for: xr 10x problems

Question about XR-10X Multimedia Projector

1 Answer

xr 10x i havent use my sharp xr 10x proyector for about 4 months, i tried to conect it but when i turn it on, only the vent starts for about 2 minutes, then it just turn off by itself, non of the leds

Ad

Question about XR-10X Multimedia Projector

2 Answers

...xr-10x-l worked fine Shut down fine as I remember? . To day all I have IS A flashing red light. I pulled the bulb it looks ok checking it with a meter it shows open? Does this mean the bulb is bad? ...

Ad

Question about XR-10X Multimedia Projector

4 Answers

...XR-10X/XR-10S We replaced our lamp thinking it was bad - we reset the projector and after many attempts it finally worked. The lamp is good but does not seem to be warming up or being engaged after ...

Question about XR-10X Multimedia Projector

1 Answer

XR 10X lamp replacement issues I replaced the lamp in my XR-10x due to age. A while back the projector refuesed to come on, and the lamp light flashed (Don't know the color, I am colorblind) I assumed

Question about XR-10X Multimedia Projector

1 Answer

...XR-10X Bulb works once then nothing I just purchased a used XR-10X and tested it when I received it; the unit powered up and showed the four segment set up screen. I turned the unit off and it went ...

...xr-10x DLP projector. We had ours since last holiday season and it just went out...totally--no power...no lights...no functions. Hoping there is a reset button...as it appears to be more than a blow ...

Question about XR-10X Multimedia Projector

2 Answers

xr-10x projector. The replace lamp light came on but the lamp still works. Understanding the inevitable I order a generic equivalent lamp because that is all that is available. Problem is every time I

Question about XR-10X Multimedia Projector

1 Answer

XR-10X projector. Makes a loud whirring noise when trying to turn on. Bulb starts to turn on then doesn't. It's not the fans because I opened up the projector, disconnected the fans and it still makes

Question about XR-10X Multimedia Projector

1 Answer

...XR-10X The power light blinks red According to the manual, a red blinking light indicates that the lamp cover is open. Try reseating the lamp and making sure everything closes up right. If the light ...

I am using Sharp multimedia projector XR-32S-L.There are white spots in the screen. What should I do to remove it? How can I clean the white spots in the screen. Is is due to dust or any other problem

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66844 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...