Questions & Answers for: BenQ FP panel

...internal video card of the monitor. It has either failed, or the cable that connects it to the LCD panel has come out of either the video card or the panel. Hope that helps

...top to bottom and is straight. If so bad news I am affraid. It is the driver tabs that go from the panel to the physical panel controller board and is not making correct contact. This will normally ...

...how to check whether the monitor problem is with the inverter board (or the bulbs) or with the panel itself (the idea of shining light onto the panel). Any suggestions on how to find out where ...

...on the screen, no dim display at all ??? Check the ribbon from the video card to the back of the panel. It has to be aligned perfectly and locked down in the right position at the video card side, ...

LCD panel no display The panel showns no display but BENQ flashes on and off check transistors Q739,740,759,760.These transistors are near the Yellow inverter transformers.Resolder these transformers ...

Benq FP71G words fuzzy with purple Word displayed have purple tint. Left screen panel also has purple line from top to bottom of screen. Move away from all magnetic interference and try to demagnetize

...two minutes the problem happens again .. is this a setting issue? As a general rule, this is a panel failing. The panel is working for a few minutes until it heats up then begins to breakdown. ...

...Vetical line is the sign of failing LCD controller (t-con) board, which is part of the LCD panel assembly, it will get worst with more lines. You can try looking at the ribbon cable that is ...

...reboot and the after two minutes the problem happens again .. Is this a setting issue? You have LCD panel failing issue or it is not getting the proper voltage to the panel. Look at the power supply ...

...on the right hand side.I have checked the cables. Have you any suggestions You have failing LCD panel or the 5vdc feeding the panel may be bad. Check to connection at the LCD panel T-CON board.