wiring problem I'm trying to hook up some off road lights on my front push bumper and the instructions tell me to hook up into one of the headlights of the truck. There are three wires that come in to
...lights came on, after many attempts. The high beams worked when switched on, so I tried turning off engine, restarting, and removing key, and still no head lights. Could this be a fuse, and why only ...
high beam indicature not working If your high beams work fine, then all you need to do is pull out the instrument cluster and install a new light bulb if all you want is to see the blue light ...
...beams do not light. I checked the dimmer switch for continuity and it functions. This happened 2 months ago and after removing the steering column cover, looking to make sure there were no lose ...
...beams just stopped working. Both lights are newer so I doubt they are both burned out. I checked the fused and they are all ok. What do you think? Probably a burned wire inside the dash of the car. ...
beams and fog work ok. Checked lamps, fuses, and relays. i suspect the stalk switch is faulty but i would need to test it first with my multimeter first before i changed it .so get you meter and check
wiring from relay to fog lights is good. fog light fuse is good . relay has been interchanged. 12v from light switch (low beam ) to relay socket is good. ground from body/batt and ground at socket are
...fog lights .Can you help me locate the parking light power tap under the dash? If it was not equiped with fog lights from the factory it will not be there, Make shure you use a relay on them, ...
...fog light switch in my 02 toyota tundra into a two way switch. I smelt smoke, disconnected it and now my headlights wont come on only drl and high beams manually on the switch. I checked all fuses, ...
How to change fog light relay on 2006 tundra Buy a new part from Autozone Search Results for Saturn relay fog light on 2006 tundra
Usually answered in minutes!
370 Questions
251 Questions
224 Questions
194 Questions
168 Questions