Questions & Answers for: Pontiac Grand Prix wiring fog lights beams

...the wiring connection on the back of the switch had worked itself off over time. He connected the wiring and it works perfectly. fog lamps only work when vehicle in gear and headlights are on low ...

Ad

Question about 1991 Grand Prix

1 Answer

My low beams don't work. The low beams don't work. I've replaced the bulbs, but still nothing. My hi beams, fog lamps and all other lights run great Check the fuse.

Ad

fog lights. After we got through the fog I turned off the fog lights. When we got to Minn. I noticed that when I got out of the car that dinging sound comes on as if I left the keys in the ignition or

...lights are switched on but no headlamps. all other lamps are functioning fine including fog, tail, brake, marker, and turn signals. there is no relay in fuse box under hood, fuse is good. could this ...

Question about 2007 Grand Prix GXP Sedan

1 Answer

...fog, turn, and brake lights all fine. Checked fuses under hood, all fine. Have not yet checked bulbs. Any ideas why both would stop working at the same time? how to install low beam light for 2007 ...

...wiring diagram for your car, you will have to cut 1 wire to be able to have all your lights on at the same time. disconnect connector to fog light check with multimeter fog light switch on. if no ...

Question about 2000 Grand Prix

1 Answer

...beams tail lights ext. all fuses good and headlight switch. i pulled the fuse under the hood for the rf high beam and it killed the car. does anyone know how to fix it? Good Evening, I have an odd ...

Question about 2006 Grand Prix

1 Answer

...com back on does that car have ground lights or fog lights it may not be your high beams coming on it may be your regular lights do you manually turn your high beams on or do they come on on there ...

Question about 2007 Grand Prix GXP Sedan

1 Answer

...fog lights all work except for low beams usually both lights don't go at once so it is probably the resistor on the same circuit, probably just a fuse or relay!  get a wiring diagram for ...

...fog lights, low beams and high beams both don't work. I replaced the multifunction switch because the gray plastic part the slides into the wire harness was starting to melt on one side. This fixed ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...