Questions & Answers for: Chevrolet Camaro wiring fog lights beams

...not the bulb, high beam and all other lights work. Make sure you use the right light because the high beams and low beams use different lights. I think the low beam is H4531 and the high is

Front fog light out how do I replace it underneath the offending fog light there is an access panel. its held closed with two 10mm bolts. take out the two bolts and reach inside for the fog light. ...

...beams, t/lights, everything else ok. From what I can see from diagram, they each (right and left) have own hot wire and ground wire. I'm thinking grounds bad. Anyone know where I can get the ground ...

...wiring problems, my headlights recently both went out one by one low beams left then right then high beams the same also my turn signals do not work also reverse light. all bulbs and fuses have been ...

I have high beam headlamps only. All 4 headlamps light up on high beam but no lights on low beam. You may want to have the dimmer switch checked. The headlights should be individually fused, so the ...

Low beams will not work. High beams work fine. Fog lights did work but now won't. All fuses, relays, and circut breakers are good. Any ideas? Dimmer switch problem.

fog lights not effected but headlights low/high do not work It sounds to me like the wrong bulb got installed or something.  This could cause all of the lights to come on all at the same time and

...fog lights work but my low and high beams want come on only the park light and fog lights check the fuse and they are good is it my switch located in the car that has short in it? It is possible but ...

i have no low beam headlights or foglights on my 1994 chevy camaro Your headlight switch may be bad. You may also have a short in your wiring somewhere associated with the fog lights.

Cantlocatehighlowbeamswitch whereisit Need to locate hi lo beam switch as I think it may be causing lights to remain on high beam when put on low beam http://www.ehow.com/how_5262885_change-out-dimmer