Questions & Answers for: General Electric wiring diagram for stove

Replacing oven burner element, the lower element, for a GE stove I have removed the two screws that are inside at the back of the oven, in order just to determine how to remove the old oven burner ...

8'' electric stove top element not working 8'' electric element , with 4-wire hookup and heat sensor will not fire up. Have replaced both element and sensor with same results. Power control knob ...

replaced the old element in the stove now the stove wont turn on There is power to the stove as the inside light comes on but nothing at all when I turn the nob to bake/ broil ? While I was replacing ...

don't remember which connects to which. is there any way to find out go to repairclinic dot com look for your range by model number and request a wiring diagram or look on the range back for a diagram

wiring an electric stove i have 3 wires from the plug; black, ground and black and red. On the stove i have black,ground,and red. does it matter if the black and red on the plug go to the red or the ...

I have an electric stove that has 1 black, 1 red I have a GE electric stove that has 1 black, 1 red and the ground. The wall has all of these plus a white wire. How should I wire these together ...

none of my stove top bunrers work but the oven does some times there is a fuse in the back by the switches or it could be a broken wire in the back.

after my oven heats up and ive set the timer it starts beeping and showing F3 and doesnt stop soihave to turn it off The "F3" error code means the oven sensor is open. An ohmmeter reading for the open

WE have a GE Stove top Range. The burners aren't WE have a GE Stove top Range. The burners aren't heating up and neither is the oven. If you have power to the stove as in the oven light works and the ...

Last night, the breaker tripped and we have lost power to the stove, hot water heater and the washer. We reset the breaker however, it dosnt seem like it is pushing enough power out for the stove, hot