Questions & Answers for: wiring ballast

ballast location? After removing the grille, still do not see the ballast, are there additional panels to remove? the ballast is right in the middle. you should see an electrical cord. open the 2 ...

I need to replace the ballast on my GDM 12 freezer and I need to know where the balast is located The ballast is located on the bottom inside wall where the compressor is located. Its usaually mounted

...wiring... I could cut them, but then how do I get the new ones in place? I assume I've just missed something obvious, since I am, literally, working in the dark! What you do is cut the wires from the ...

need to hook this up to a lutron eco-t528-277-2 ballast which only has a hot,dimmed hot and neutral If I understand correctly, you have Leviton florescent dimmer And you want to connect dimmer to ...

How do you change a 2 wire ballast to a ballast with a black and white wire,2 reds and two blues.I have a 2 tube 18 inch fluorescent lamp with 2 ballasts in it.Each ballast has 2 wires coming out of ...

...ballast. The existing wiring has blue / red / yellow / black & white wires. I have a new ballast (yes I confirmed at the store it is the correct one) but it does not have the yellow wires. Where ...

how to connect a 3 floresent bulb ballast to 277 voltage power source the 3 supply wires, red black and white: i understand the blk to the blk on the ballast, the white to the white on the ballast, ...

changing 7 wire ballast to 6 wire ballast i have 7 wire ballast for 2 x36w lamps new ballast has 6 wire its got to be the wrong one--wrong ballast.

...wiring ballast, use wiring nuts to connect the wire from the new ballast to the wire from the tomb stone socket. DO NOT TRY TO take the wire out from tomb stone lampholder. Below link is for your ...

...for Magnetek hps ballast cat.no.12310-153 All the ballasts I've ever wired have the wiring diagram on the ballast. I can't find one specific to the Magnetek. Here's a video - how to wire ballast ...