Questions & Answers for: wiper control arm

...wiper arm moves only a little Last night, in the snow and ice, the passenger side wiper arm got caught on the drivers side. It tore appart the passenger blade, but appears to have stripped a drive ...

...wiper pivot arm. Remove the pivot arm nut cover. Remove the nut. Remove the windshield wiper pivot arm. Raise and support the hood (16612). Remove the cowl grille seal. NOTE: The two cowl grilles ...

...wiper control module PCB is failing. This is the box on the firewall behind the wiper motor. Suggestions: 1. Resolder all the connections on the board. The solder joints crack with age. Have fixed a ...

...?bushing? ? some kind of bolt or rubber piece ? to reconnect the arm to the motor. Please tell me what the name of that part is and where I could find it? Thank you. its a wiper control arm nylon ...

...wiper control arm I snapped my wiper control arm this morning. Is it easy to fix?? Hi there. the wiper control arm, if it is the outer one it can be easy to replace. Just remove the cap at the bottom ...

...us JB weld to put them on or get new ones or junk yard ones. Sounds like the control arm may be loose from the wiper motor. Check the connecting arms to the motor....may have become

control current to the windshield wiper motor . The governor electronic circuitry controls the contact to supply current to windshield wiper motor . A rear wiper/washer system is available on Explorer

...the wiper motor and get to the inner wiper control arms. There's a chance that one of the nylon cups which connect the control/drive arms has popped off and simply needs to be

...wiper control arm Depends on your car for the actual steps but generally goes like this: remove both windhield wipers from their posts (look for a release clip or a nut at the base of the wiper where ...

WIPER CONTROL MODULE With multi-function switch at OFF, check continuity between Circuit 28 (BK/PK) and 56 (DB/O) and between Circuits 61 (Y/R) and 63 (R). Is continuity OK? Yes No GO to E5 . GO to E4