Questions & Answers for: Pontiac G6 wiper arm

...wiper arm the wind shield wiper arm ball join snapped. i took the nut off the top of the blade arms but they still dont come off how do u get them to come off you need to get a tool for that job or ...

arm that connects to the wiper motor is off for some reason.If you can grab your wiper while you hear the motor running and see if there is any drag,like it is trying to move then you may just have to

what is the cap that hooks the windshield wiper arms to the windshield wiper motor dust cover?

pontiac g6 2006 wipers stopped movement while driving. what could this be from? I already checked fuses. i hear the motor running making noise Either the linkage for the wiper arms has come apart or ...

...wiper arm off a 2007 g5. Hello, To remove the wiper arm of your pontiac g6, take a close look of the wiper arm, check the lower end and you will see a plastic cover covering the bottom part, you will ...

...wiper motor arm . they use a press fit on a cup and ball socket to attach the wiper transmission to the wiper motor there is a metal arm bolted to the wiper motor with this ball on it . The wiper ...

how do you remove wiper arms to get to wiper motor to replace motor? small alen wrench. most parts stoure will let you barrow it and even show you what to take off. good luck

...wiper arm but I can't get it to fit. Any suggestions would help, thanks. I just put Bosch blades on my 2007. Those blades fit multiple vehicles so they include a squre plastic cap covering ...

WIPER MOTOR RUNS BUT WIPERS WONT MOVE WIPER MOTOR RUNS BUT WIPERS WILL NOT WORK. WIPERS WORK FREELY BY HAND. everyone will tell you that the linkage/transmission will need to be replaced but it ...

...arms and align to reference marks. Tighten wiper arm retaining nuts to 26 ft. lbs. (35 Nm). Install finish caps. https://www.youtube.com/watch?v=dHJli8z1_jI ...