Questions & Answers for: Nissan Sentra wiper arm

...wiper linkage arm disconnected The arm that goes to the driver side wiper has fallen from the center linkage. I have placed it back into position but after a short period of use it will fall out of ...

...wiper arm does not move. the passenger side does. how do i fix this? there is a cap on the arm where the arm bolts to the wiper motor remove this cap and try tightening the bolt underneath it The ...

...wiper arm fell off....good luck...lee You may want to just check and see if the arms are slipping, and if so, that means the wiper motor is still good. To do this, remove the entire arm & watch ...

The wiper is not working on the driver side only on the passenger side. What is wrong and how to fix it? With the arms off you will see the mechanism moving back and to if you switch the wipers on and

...wiper assembly is not working. My wiper motor still works, but it has become detached from the arm that drives the wipers. How do I fix it? It is broken. Please check and replace defective

wiper arm slips on shaft after tighting on 1996 sentra windshield left wiper stays loose after tighting loose bushing or what you may have a bad set of splines either on the wiper transmission arm ...

'97 sentra wipers stop at different places on the glass. Is it the motor that's faulty? I took off the wiper arms and plastic grill thing covering the linkage arms. Then, when I ran the wipers

...with the ignition on. Check for looseness of the spindles ( wheel boxes ), refit the second wiper arm in the correct position, checking for looseness , if all seems ok retest with the ignition

wiper center pivot arm resident glue What type of resident or glue should I use when installing the wiper linkage arms to the center pivot assembly i use a brand called LOCKTITE but just google thread

...wiper arm goes on, it's splined so it wont slip when in motion. But you should be able to pry up on it and it should pop right off. Just look at it first to make sure theres not a bolt or nut holding ...