Questions & Answers for: Jeep Grand Cherokee wiper arm

wiper blade fully extended away from the winshield and wiggle the arms off. The blades are removed by a little tab where the blade hooks to the arm,using a small screwdriver push down on tab,and slide

wiper arm removal I have a 2002 jeep grand cherokee V8. I want to paint the wiper arm . I removed the nut that holds the arm down but the arm is still on tight. What to do? Thanks Well the trick i use

wiper arms how to remove nuts under wiper arms on 1999 jeep grand cherokee at the end of the wiper arms lift up the covers there u find the nuts.

...wiper arm away from the glass then pull the tab up then slide the wiper down and slide the wiper off the wiper arm. but the best thing is have someone show you how to do it for the first time ...

...wiper arm so it can be repositioned on the windshield. If you look where the arm connects to the shaft stub, you will see a small stainless steel tab that swings out. That tab engages a groove in the ...

wiper arm How to remove 1996 Jeep Cherokee wiper arm so it can be repositioned on the windshield. At the base of the arm where it attaches to the drive stub, you should see a "L" tab made of stainless

...the motor had fallen off. The simple solution was to recycle the wiper assembly after removing the wiper arms to the home position and replacing the transmission arm to the motor and replace the

...wiper arm might have broke. Where can I find a replacement part? Hi,    Yes, the wiper is a two piece wiper. Can not be bought at  Walmart.One piece is bolted ...

...wiper arm. To get to your cabin filter, first you must remove your passenger wiper arm. Remove the wiper blade arm by pulling off the cap that is over the nut, and using a socket to remove the nut. ...

wiper arm away from the window. ----- 2 - With one hand holding the wiper arm press the small tab on the underside of the wiper blade where it meets the wiper arm. ----- 3 - Slide the wiper blade