Questions & Answers for: whirlpool fill valve is stuck open?

...be in good working order.It washes and drains perfectly well. can anyone please help You have a water fill valve that is stuck open. Valve needs to be replaced. Hope that helps. Dave ...

...fill valve is defective or it may be the drain valve is stuck open. If it is not filling with water at all, it is probably the fill valve. If it is filling as fast as it is draining, it is probably ...

cold water will not shut off Whirlpool Duet, cold water does not stop filling washer even when machine is off!! Mixing valve stuck open, replace

Whirlpool Duet GHW9100LW1 fills up with power off My Duet clothes washer fills up with water even when the power is off. The water eventually leaks out of the open door. If the door is latched closed,

...Whirlpool Ultra Dishwasher Age: 3 yrs Problem: Not enough water to effectively wash the dishes. State: When the dishwasher is started, the fill valve opens as normal. Only about 1/2 the amount of ...

...Whirlpool Duet GHW9250ML2 when the machine is off it is filling up with water, unplugged it and am having the same problem with it unplugged, thought it might be the inlet valve but think that would ...

...valve stuck open? Or is it circuit board going bad? The water LEVEL SENSOR has failed and so there is no detection of the level selected on the washer. Hence the inlet valve is not cut off even after ...

whirlpool duet washer keeps filling up with water while on and I just replaced the pump what can I do The fill valve(s) may be sticking open. You can access them by pulling screws and lifting top from

Whirlpool ADG6240. Have tried to reset the machine but it keeps reverting to F9 again. Water spray from the left side of the machine is continuously spraying. if i turn off the machine it will fill up

whirlpool washer not turn off? You mean that it wont stop filling? If it is continuing to fill when you start it, the water level sensor might be bad or plugged. IF it fills when it is off, unplug the