Questions & Answers for: wheel size

...focus had options to wheel size, If you have the 15 inch wheel the original tire size is 195/60-15 and if you have the 16 inch wheel option your tire size is 205/50-16. Good luck and hope this

wheel size. Up one tire size in a 17 inch is 255/50r17, with nearly the same circumference, but much wider and more sidewall profile. Up one (referred to as "plus one") wheel size, 18x9 inch, would be

...wheel size) are: for 15" wheels: P195/65R15 for 16" wheels: P205/55R16 You should stick to the above sizes as per their recommendations, to avoid speedometer inaccuracy and handling issues.

Wheel size rear laced - 16 in. rim width and contour - T16 X 3.00 D Tube size - MJ90-16 Wheel diameter tubless rim front - 19 in rim width and contour - T19 X 2.5 MT Wheel diameter tubeless rim rear -

...wheel size for toyota celica 2002 and what sizes will fit alloy wheels Wheel Part Number: #69387 2000-2005 Toyota Celica Size: 15" x 6.5", 5 Lug, 100mm Bolt Pattern Finish: Silver Description: 5 ...

...wheel size for my Sigma 1009, on my wheel it has 26 x 2.35, but it does not have that size on the wheel size chart, what is the correct size. The manual explains how to measure your wheel exactly and ...

wheel size? Gearing and speedometer accuracy is normally affected when you replace the wheels on a car with larger ones. Wheel size is composed of 2 dimensions, the wheel width and wheel diameter. For

...Wheel Position and size = 19 inch Front; Rim Size and Contour = T19x 2.15 MT; Rim Valve Hole Diameter = 0.45 inch; Tire Size = Dunlop D401 ELITE S/T 100/90-19 Wheel Position and size = 16 inch Rear; ...

...WHEEL SIZE & POSITION = 21 in. - Front RIM SIZE & CONTOUR = T21x 2.15 TLA TUBE SIZE =Side Valve Tube MH90x21 TIRE SIZE = DUNLOP D402 MH90 - 21 54H With a CHROME ALUMINUM PROFILE LACED RIM: ...

...wheel nut size for your truck Hex Size (mm): 22mm Thread Size: M14-1.50 Hex Size (In): 13/16 Inch Thread Size: M14-1.50 Hex Size (In): 7/8 Inch Thread Size: M14-1.50 List Wheel Lug Nut 1993 Chevrolet ...