rewireing a handle I got a second hand handle for a tc201 but it had been repaired but was not working. I opened it up ant the wires had been re spliced badly so I respliced them but the head came off
...I need the female end of the connector that the soldering iron itself connects to the base for a Weller WTCP soldering station. This is a black connector, and I need the female part that mounts in ...
Question about Industries Weller Field Soldering Iron, Controlled Output
...weller soldering station wtcp-s I have two tips. sudenly, one of them is not reconecting the thermostat. Its looks like it has not enough magnetic power to pull it after cooling. This tip with the No ...
Question about TC201T: Soldering Iron For Wtcpt, 42 Watt
...Weller TC201 handset, I would like to know how the cord is installed on the handset end. Wiring is easy... look at the parts blowup here. It appears that two of the wires from the cord use wire nuts ...
Question about TC201T: Soldering Iron For Wtcpt, 42 Watt
I have the tc 201 t and it has heating problems...it is either real slow or will not heat at all. I have changed the Pencil (with a friends)and it works so I assume the problem is with the pencil. ...
Weller WD1. At power on screen says "OFF". The 3 preset temperatures are still displayed. Tested with a working lead and soldering tip, OK. Just press UP/DOWN at the same time quickly. If ...
Question about TC201T: Soldering Iron For Wtcpt, 42 Watt
How do I take my soldering iron apart? My soldering iron no longer gets hot and I am having a difficult time taking it apart. I've removed the screws and the tip, but I can't get it out of the handle.
Usually answered in minutes!
111 Questions
70 Questions
52 Questions
49 Questions