Questions & Answers for: Peavey watts 0 amps

0 ohms) why didnt both HFdrivers blow?? they are the older 22xt's, im running right at the program watts about 320watts, speakers are rated at 350watts program. HELP??!! POED SOUNDMAN If the horn cuts

I have a pair of peavey messenger pro 12 tops250watts rms @ 4ohms and a pair of peavey pro subs 300 watts rms @ 4ohms i want to connect the output of the subs to the input of the tops, the subs have a

...watts. 6.5 inch speaker, probably 8 ohms. Most amps of this nature have 8-Ohm speakers. Their 12-watt and 15 watt amp have a 6.5". Their 20 watt amp has an 8". The 80 watt has a 12". Hope this

...board? that depends on your speakers, not the mixer. the amp should be matched to the speakers, in watts and in ohmage. for example, 400 watt, 8 ohm speakers should get an amp that runs at 350-500 ...

...versarray 218 subs but not sure what amp I should use to power them speakers are rated at 4800 Watts "program"... for safety, I would use an amp that can deliver around 1200 Watts

...amps when used on 12.8 volts. If this is in regards to the other problem mentioning 32 watts and 12.8 volts... this bulb is NOT 32 Watts, it is 32 CP or 32 Candlepower which is NOT Watts in general. ...

...or about 288 Watts in round figures before considering losses. Many car amps are designed to run with 2 ohm speakers... JUST SO THEY CAN CLAIM massive power values in their ads so you will buy

amps into clipping. Also, while the speakers are rated at 600 Watts, you don't want to use an amp that delivers that much RMS. Use about 300 Watts per side. Unfortunately you did not mention the brand

...out and burn up equipment. Your amplifier driving one of these should be rated at no more than 200 watts RMS. These "400 watt Prrogram" ratings are for the birds... fake advertising. Put 400 watts ...

necesito saber que amperio tiene el fusible de entrada de una peavy pr 10 YOU MUST DIVIDE  I= P/E  I= AMP  = P= WATTS E= TENSIONAND YOU WILL GET THE AMPS.SINCERELY. God bless you