Questions & Answers for: water meter Heating & Cooling

meter (measures water intake- cannot test with meter), or faulty control board. Flow meter located on Left hand side of machine- accessed by removing side panel. It has a sensor with 3 wires(red,white

water flow. If the flow meter does not spin when the pump is running, the computer thinks that the pump is not primed. Coffee grounds will get into the intake and restrict the flow meter. If you get a

...meter creates a jet of water that spins the turbine. This lets the computer know that water is present and turns the heater on. If the turbine doesn't spin the computer thinks the pump is bad and ...

...meter, water inlet valves, or the pressure switch. Check the level of water inside the tub when the error code flashes. The pressure has not tripped if there's enough water inside the tub. Verify the ...

...water flow meter is not reading the correct water flow. Make sure that no water is draining out of the drain hose due to siphoning as water fills in and position the end of the hose to prevent such ...

water meter to the house. I have OneGuard home warranty and would like to know if it is true, what this HomeServe outfit says, that neither the water company (in this case, EPCOR) nor my OneGuard home

meter failure Symptom: Water inlet valve (WV1) is switched on and the water indicator (WI) is on (level reached). Reason: Water tap closed during water inlet Water inlet hose blocked Water inlet valve

...meter failure Symptom: water inlet valve (WV1) is switched on and the water indicator (WI) is on (level reached). Could be: 1. Water tap closed during water inlet 2. Water inlet hose blocked 3. Water ...

meter per second, how many cubic meters of water would be pumped in 24 hours? 7 cubic meters /second = 7 X 60 /minute = 7 X 60 X 60 / hour= 7 X 60 X 60 X 24= cubic meters per 24 hours or another way 7