Questions & Answers for: Rheem water meter

...meter reading increases at least my 2 kwhs every hour on the hour. Results are approximately 50 kwhs per day. With the water heater turned off, my daily useage is less then 15 kwhs per day. Maybe you ...

...water the error code 12 starts flashing. Same when you turn on faucet in bathtub. Awaiting call back from 2nd tier tech support. actually, does it give you a big rumble? if it does, then your problem ...

...Water Heater, so I'm guessing the meter isn't getting the job done. Even with the HVAC and other appliances off, I can't get it to not error even with just one faucet open and only heating to 104F. ...

water heater is hooked in) and put the meter across the black and whiter wire so you see a reading of 110-130 volts. again have someone help you and cut the breakers one by one till the meter drops to

...water temperature, faulty parts, un-maintained parts, obstructed venting, etc. To get accurate number will require work on your part: 1) You can add a gas meter to that one appliance. 2) Or look at ...

Water meter is ticking away. No sign of water or Water meter is ticking away. No sign of water or leaks, most plumbing visable. Have turned off all sink and toilet valves. Turrn off water main, ...

...meter. Turn the breaker off to the water heater take the access cover off for each element and disconnect the wires to each element, then put your meter to check for continuity and put one electrode ...

btu rating on natural gas meter location of btu output on natural gas meter Gas meters are usually rated in cubic feet per minute (CFM) not BTU. there are 1027 BTU per cubic foot so do the math. Try ...

...water meter. Moving it closer to the chiminey I was told there should be no reading at all on the CO2 testers. If you have any reading call the fire department or 911 and they will check it for ...

meter sensor (also referred to as cold water temperature sensor.) This means that the flow meter is not sending a signal to the computer which starts the machine. Possible broken wire, poor connection