Questions & Answers for: washer turbo nozzle

...as though there is a vapor lock in the wand. the water supply is disconnected and there appears to be pressure is the washer hose. The wand is dirty!! Clean out the Nozzle with a small diameter

...Washer Turbo NozzleTurbo nozzle sprays up to 3.1 GPM at 2300 PSI and 194°F. Unique design delivers 0° high pressure impact with wide angle spray coverage. The point of the Turbo is that it ...

...turbo nozzle how do you take apart the nozzle. Most commonly, debris gets plugged internally in the nozzle holes. Using a small pick from the outside, with the nozzle removed from the wand (it is ...

Where can I get an orifice (nozzle for idrojet, blue, #4.0 - part# 22593 for a NorthStar pressure washer 157557? www.powerclean-engineering.co.uk Turbo nozzle

can't unscrew nozzle from hose what do I do to loosen? I used a vise and pipe wrench to loosen. Have to be careful with the vise that you don't over tighten it and damage the hose fitting. When ...

nozzle does not spin Sounds like you may have some dirt inside your turbo nozzle.

...washer works fine. If I attach a turbo nozzle the pressure hose will burst. Turbo heads are pressure rated for different pressure washers, your turbo head is most likely rated bellow the maximum ...

I primed the engine on a 2650 psi pressure washer and put on the nozzle. Why does it pulse? Every pressure washer I've used pulses...

turbo wand and nozzle connection on my Pressure washer Model 580.752070 How to restore seal between Wand and nozzle? Please point me in the right direction to resolve this problem Turbo Wand and spray

washer. How to get a focused jet? Is the nozzle adjustable? The spray is now only producing a wide angled fine mist and won't produce a focused jet which I can use to clean a brick pation. Does anyone