Questions & Answers for: Haier washer

Question about HLP21E Top Load Washer

2 Answers

Popping while removing Hose Adapter I just purchased the Haier Top Load Washer. Does everyone have the same problem when removing the quick release hose adapter? When I remove it, the pressure from ...

Ad

Question about HLP21E Top Load Washer

3 Answers

water is not draining You probably need to replace the displacement pump underneath the washer. If you look inside the washer, you can trace the drain tube that goes out behind your washer to a small ...

Ad

Question about XQG50-11 Front Load Washer / Dryer

2 Answers

...old AM/FM radio and just happened to see that more than 4,700 people were asking for help with a washer repair. I recently had a washer repair of my own and at that time I found an excellent video ...

Question about XQG50-QF802 Front Load Washer

1 Answer

...bareing as it made a really loud noise then stoped spining and it had a burning smell Hi, When my washer did that, I found that the shocks that hold the tub were bad... Check out this tip I wrote ...

Question about XQJ50-31 Top Load Washer

1 Answer

...buttons, nothing is happening You can try resetting your washing machines operating sytem. Turn the washer OFF Standing on a dry floor, unplug the washer from the outlet Wait several minutes Replug ...

Question about HLP23E Top Load Washer

1 Answer

leaking inlet hose I just bought the washer, it is leaking at the inlet hose going into the washer. No water goes into the washer, just leaks around the hose. What am I doing wrong? maybe the pump ...

Haier HLP21N washer will not spin or drain water. I try to wash and the washer will not spin after the water is in the tub. I lost $50 on a "service man" who fixed the machine and in one hour the same

Question about HLP23E Top Load Washer

2 Answers

...water inlet w/initial installation. When the water inlet was hooked to the faucet and into the washer, water leaked on the washer end. The manual tells you to put a new "flat" washer (provided) ...

Question about HLP21E Top Load Washer

1 Answer

...you with the quietest performance possible during the wash cycle operation. 1. First, lay down the washer on its front side. 2. Place the panel against the bottom of the machine. Align the holes in ...

Haier HLP23E - Washer is off. When I turn on the water valve, it starts to fill the washer even though washer is off, anyone know what could be the issue? Washer is off. When I turn on the water valve

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Haier Washing Machine Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Haier Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...