Questions & Answers for: volvo valve cover gasket

...valve is on my 2001 volvo s40.. and if it is hard to replace? And where is it exactly located at? Thanks! your IAC valve, idle air control valve is under the black plastic cover on the front right ...

VOLVO S40 VVT VALVE WHAT'S THE DIFFICULTY IN SWAPPING MY OLD VVT VALVE WITH A NEW ONE Very easy to swap the vvt valve,but that will not guarantee to rectify the problem,more than likely it will be the

volvo 850 non-turbo Hi, I'm considering buying an 850 with 170,000 KM's (105,000 miles) on the clock. It's been well serviced, well-looked after. I looked closely around the engine for any obvious oil

...volvo 850 There is no valve cover gasket for that engine. The cover for the cams is sealed by a special sealant that is applied to the cover and then it is torqued on. You could get into a world of ...

...valve cover gaskit, is it very hard to do? yes it is, basicaly because there is no valve cover gasket. if it leaks from the seem that would look like a valve cover leak then you have to pull off the ...

...valve cover gasket. Replacing it is simple, you have to clean the cover thoroughly before placing the new one, use a silicone on the new rubber gasket seal, to add up it sealing. Hope that helps you ...

...Volvo tool number 5454 or equivalent to the upper cylinder head. Tighten the nut on the tools to seat the upper cylinder head. Tighten the upper cylinder head bolts, beginning from the center out to ...

...valve cover gasket, it will often burn off on the manifold. a blown oil seal causing oil to burn off on the exhaust system check your exhaust for "blue smoke" a sign that the engine is actually ...

...volvo's but the valve cover just rests on top of the cylinder head, basically. Here is a how to with volvos: http://www.ehow.com/how_6668379_change-valve-cover-gasket-volvo.html You will need tools, ...

...Volvo S40 2.4L lower Intake manifold gasket and valve cover gasket I've removed all the nutts and bolts and their is a line that I believe comes from the gas how do I remove that or what do I need to ...