Questions & Answers for: Chevrolet Impala 5 volt is low

Question about 2002 Impala

1 Answer

...volt meter and see what kind of volts are in there. (should be at least 12) If lower, re-charge battery and clean terminals. (make sure you know radio code before removing terminal ends, and how to ...

Ad

...volt test light on low beam and high beam you may just have a bad head light switch make sure you have headlight power coming out of the swicth for low beams. Your low beam headlights are burned out. ...

Ad

Question about 2004 Impala

1 Answer

low, then the PCM may be bad. NOTE: On some models it is possible for the 5 Volt reference signal to be temperarily shorted. This can happen if an engine sensor internally shorts the 5 Volt reference.

Question about 2004 Impala

2 Answers

...volt reference voltage low Sounds like you have some possible voltage wiring problems with the intake air temperature sensor, or the sensor itself for the p0113 code. The EGR insufficient flow is ...

...bank one sensor two which sensor do I replace If you have access to a scan tool, check the signal voltage for the Bank 1,3 oxygen sensor with the engine at normal operating temperature. Is it stuck ...

Question about 2006 Impala

1 Answer

...39;t start. 2006 chevy impala. Check the battery terminals for cleanlyness and tightness. Check the voltage when stopped, it should be 12 volts. Check the voltage with the motor running, it should be ...

...volt reference circuit and a ground on the low reference circuit. Rotation of the TP sensor rotor from the closed throttle position to the wide open throttle (WOT) position provides the PCM with a ...

Question about 2002 Impala

1 Answer

...shut off and locked me in it! claustrophobia..not cool! help This sounds like a you are having a voltage problem.  Have the charging system checked.  A bad battery or poor alternator ...

Question about 2000 Impala

1 Answer

...tests on the deployment loops to check for proper circuit continuity and for shorts to ground or voltage. If a malfunction is detected, a Diagnostic Trouble Code (DTC) will be stored in memory. ...

...volt reference circuit, a low reference circuit, and a signal circuit. The control module supplies 5 volts to the BARO sensor on a 5-volt reference circuit, and provides a ground on a low reference ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...