Question about 2004 FXDWG - FXDWGI Dyna Wide Glide
...of my carb and i cant seem to find where the other end of the hose hooks too? The hose goes to the VOES (vacuum operated electric switch) and the petcock if you have a carburated engine. The purpose ...
Question about 2004 FXDWG - FXDWGI Dyna Wide Glide
...harley carb with VOES tube The original carb on a 1983 XLH was a Kehien "butterfly" type carb as opposed to the current Kehien "CV" type carb. You can find a replacement carb but you're going to look ...
Question about 2002 FLHT Electra Glide Standard
...this in houston would alttude cause this. what do i do to stop this Your bike is equipped with VOES switch that is supposed to stop this. The purpose of this switch is allow the timing to ****** ...
...the induction system. Check the small hose that comes off the backside of the carb and goes to the VOES switch up between the tanks. Good luck ...
...or a higher quality fuel and see if that eliminates the problem. Another problem could be your VOES (vacuum operated electrical switch) could be bad. The purpose of this switch is to ****** the ...
...coming from behind the air filter and routed to the front of the bike. I am assuming it goes to the VOES switch but I can not locate it. can anyone tell me where the switch is located or what this ...
where is the VOES switch on a 2001 fxdwg 2001 dyna Does not have one
VOES what does this do Hi Anonymous, it's a vacuum operated electrical switch that tells the ignition module when to advance and retard timing. It is located just above the intake manifold. Good luck
Petcock vacuum hose Where Does it hookup to ? the hose runs from the petcock to a tee. the tee splits one hose goes to the voes switch and the other hose connects to the back of the carb
harley dyna voes switch What year is it. You posted under 2000 Sportster. Nevertheless: VOES uses vacuum to switch between two MAPS. What is your porblem or question?
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions
