Questions & Answers for: viscosity fluids

...hydraulic system at temperatures above 180°F should be avoided, fluid temperature is too high when viscosity falls below the optimum value for the hydraulic system's components. This can occur well ...

...you do a system flush. The other thing to that is the best thing out there is use a Synthetic Low VISCOSITY Automatic Transmission Fluid. NOTE, LOW VISCOSITY. The thicker the viscosity the more ...

...transfer case what fluid is used in the front transfer case Standard differential gear API GL-5, viscosity SAE 80W-90 Limited-slip differential (LSD) gear; Use only LSD gear oil API GL-5 and SAE ...

...It's shooting a stream. This could be a worn or dirty spray tip, or the fluid is at the wrong viscosity for the pressure and either the pressure needs to be raised or the fluid viscosity ...

what kind of transmission fluid goes in a 1999 pontiac montana Recommended GM DEXRON® VI, Low viscosity transmission fluid. Note: make sure you don't over fill transmission and the Montana's ...

...is found on the dipstick. Manual Transmission Lubricant Manny manual transmissions use gear oil viscosity of about SAE 80W or 90 grade. This is a gear oil viscosity and has nothing to do with ...

lubricates the engine bearings and piston rings. It has different properties and is much lighter in viscosity than gear oil (standard transmissions) or ATF (automatics). Gear oil is much thicker (high

...their own brand of power steering fluid. The power steering fluid MB 236.3 is a slightly lowered viscosity version of ATF Type A Suffix A - most likely the low-viscosity fluid is required because ...

...syringe to take out all of the fluid and put new fluid in what will happen nothing its a lighter viscosity fluid but i would get the lines ...

...fluids are far more common, and the thickness (viscosity) of these increases, or decreases, with increasing stress. A good example is quality wall paint. It flows on with the brush easily because its ...