ignition lock cylinder lost both sets of keys have to change the ignition lock cylinder. looks like a bit of a trick to remove the two pins take the registration or title to your local dealer and have
...vin 4 cavalier. Remove the right tire and platic sheilds. Remove the tensioner pully, (2 bolts). Remove the harmonic balencer on the crank shaft, 3 bolts first then the center. Use a pull hammer with ...
...pin hole in the crankshaft. Attach the tool to the crankshaft. Tighten the T-handle to push the seal into the bore. Continue until the tool collar is flush against the block. Loosen the T-handle ...
Having problems with my 2001 chey cavalier key will not turn to start car worked before (with some problems but not always) had a new key made from a lock smith using the "vin number" the ...
Question about 2001 Cavalier
...vin number T i removed the oil pan and found a piece of a guide in the pan it is a 2.4 liter TIMING CHAIN, REPLACE Caution: With the timing chain removed, avoid turning the camshaft or crankshaft. If ...
Usually answered in minutes!
1,849 Questions
1,641 Questions
1,529 Questions
1,438 Questions
1,339 Questions