Questions & Answers for: LG Studioworks no video signal

Question about Studioworks 45 14" CRT Monitor

1 Answer

...the sides of the screen away from me, it turns back to normal - but not for long! Any ideas?! check cable and resistor that is giving 2number pins signals to video amp. ic and driver of green

Ad

Question about Studioworks 440SI 14" CRT Monitor

1 Answer

...video signal while connecting the signal cable the screen is turned black (no signal) pls tell me what is the exact problem. thanks n regards kamal singh ph 9350447782 Your request for the exact ...

Ad

Question about Studioworks 700S 17" CRT Monitor

1 Answer

...video card and see if you are getting a signal. If you still do not have a signal in the good monitor there is something wrong with your connection on your video card. Check the connector on your ...

Question about Studioworks 700S 17" CRT Monitor

1 Answer

...transistor might be defective.or print loose. circuit related to green video ckt green video signal coming to green video ckt. & finally crt defective (in rare case.) hope this will help good

Question about Studioworks 700S 17" CRT Monitor

1 Answer

check for signal coming to video output ckt. for ckt you can refer modern color monitor ckts volume 1&2. available in india. hope this will help. good luck be in contact with me unless it is rectified

Question about Studioworks 563N 15" CRT Monitor

1 Answer

...contacts in video section that means CRT Neck board dry points checke it. 2.Pl check VGA Cable RGB signal pins 123 to ground 75 Ohms (on OK condition). 3.check 5v supply 4.check SDL and SCL

Question about Studioworks 700S 17" CRT Monitor

1 Answer

...you disconnect the monitor from the PC can you see a "check video signal" or some other message? Try connecting it to another PC or laptop and see if it does the same thing. if so the monitor is ...

Question about Studioworks 700S 17" CRT Monitor

1 Answer

...video signal, sync and resolution, whereas the video female uses an analog signal with different signal info. you need to get a tv out adapter for your pc that cames with a the display hardware. look ...

Question about Studioworks 700S 17" CRT Monitor

1 Answer

my lg 17inch CRT flatron E700SH monitor is blinking light but it not given display Did you check to make sure the PC is sending a video signal? Try another screen to confirm if possible...

Question about Studioworks 700S 17" CRT Monitor

1 Answer

...the signal cable is a male connector at either end. Are you sure you are trying to connect it to the correct port on your PC? Does your PC have onboard graphicis or do you need a seperate video

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...