Question about 1997 Explorer AWD
Vibrating noise coming from either the engine or underneath 1997 Ford Expedition v8 5.4 liter 4wd Eddie Bauer, I noticed a vibrating noise coming from either the engine or the undercarriage of the suv
severe vibration I have a 96 Ford Explorer 5.0 V8 auto tranny.There is a severe vibration even after I put new shocks.upper control arm bushings,upperball joints.the lower look ok.with the engine ...
severe vibration and knocking sound! I have a 96 ford Explorer.Thers a severe vibration in front end of vehicle.Ive put new shocks,ball joints,upper control arm bushings,the lower seem to be ok,when ...
got bad vibrating in the front end of my 1997 explorer change the u-joint and the vibrating is still thier slow speed or fast speed ,or all speeds .have you checked for deformed tyres ??? do you have ...
when i accelerate on my 2004 ford explorer the car vibrate, the more i accelerate the vibration increase. This is not comfortable driving with this vibration. please help. check for play in the ...
I changed the lower ball joint on a ford explore and now have vibration in front end. Does it even sitting still Could be your anti lock brake pump. If it clicks on, it will cause a vibrating. Try ...
My 2005 Ford Explorer 4x4 vibrates/shakes Problem 1. Once I reach 60mph, my car starts to vibrate. It feels like it is centered in the vehicle. The steering does not pull one way or the other. Under ...
Question about 2008 Explorer
Problem with 2008 Ford explorer. Rough, grinding sound & vibrations upon acceleration Rough grinding sounds with associated vibrations occur intermitantly when accelerating. Notice more during ...
Front end vibrations Noise and vibration comes un expected and when I almost come to a stop it quits for a while again. In 4 wheel drive it don't vibrate Torsion bar bushings, cv joints You need the ...
My 2003 ford explorer v8 have a vibration above 55mph for over a year now, and it worsens. Over the time I replaced both front wheel bearings, both rear wheel bearings, rear drive shaft U-joints, ...
Usually answered in minutes!
2,998 Questions
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions