Questions & Answers for: vaseline freezer seal

...freezer and it has recently stopped sealing when i close the door. The compressor is still working fine, but because the door won't seal properly, the items inside are beginning to defrost. Can you ...

...freezer is 6 years old. The past 6 months ice has been forming very rapidly, on the top shelf. It is still keeping food cold, but seems like it is running more than normal. I checked the seal and it ...

...freezer as if the seal around the door is not working properly. Is this a likely problem and can I replace the seal myself? yes it sounds like the gasket is eithre dirty or wore out, try to clean it ...

...pops open about 1/4-1/2 inchs. Nothing is blocking the freezer from shutting. there's nothing wrong w/your dr seal. add a then layer of silcone or vaseline to the seal. this will make it sticky

vaseline to the freezer compartment to prevent frost build up Check seals around door....you need to reduce the amount of moisture entering the freezer compartment. The frost will build up on anything

...freezer frame. You can put a light film of petroleum jelly such as vaseline or equilavent on seal and sealing surface. Check to see that door is hanging straight in relationship to frame. If it needs ...

...vaseline and leave the door of the freezer closed for at least 3 hours this causes the door seal to mold properly and keep the proper suction to make sure the door stays snug and grabs onto the frame ...

...Vaseline along door frame. This will make door seal stick better. Also check there is no ice building up in freezer. This is a self defrosting fridge and built up of ice inside means warmer ...

...freezer is now forming ice - it is quite old First point of investigation, is to check the door seal. Sometimes new seals get stuck-suction and when opened and shut possibly cause a small tear, ...

...Vaseline and hairdryer heat to help create a better seal on Kenmore upright manual defrost Freezer gasket?? cleaning the gasket first is a must . warm soapy water .then check the seal gasket with a ...