Questions & Answers for: valve seats

...valve seats and stem/washers assemblies, but my cold water valve seat housing itself has corroded through, so the faucet continues to drip around the valve seat.How do I get that piece out ? It is ...

Ad

The intake valve seat has come off. How do I re The intake valve seat has come off. How do I re install it so it will remain seated. These are originally pressed in correct Yes they are pressed in but

Ad

valve seats. Usually, these engines are just fine with a cleaning of the parts and a re-lap of the valve seats. Replace all the gaskets and valve guide seals - and you should be ready to rock and roll

...the engine describe fully two test procedures that could be used to confirm a misfire due to poor valve seat. its any car but it wouldnt allow me to send you the question without writing a make of ...

Gas leaks out of carb if I don't close shutoff valve. Why is this leaking? works great otherwise Your float is stuck in your carb, just take the bowel off and clean you might want to change the needle

Question about 2002 Jetta TDI

1 Answer

...is smeared on the face of the valve seats and the valves get twisted left and right to remove carbon buildup and to give a fresh surface to the valve faces and valve seats. Please rate my

Question about 1990 4Runner

1 Answer

what causes a valve to burn 4y engine The cause of valve to burned are worn valve seat,worn valves,overheated engine, Its mainly the exhaust valves that burn due to worn valve seats

Question about 1998 Voyager

1 Answer

nocompressionvalve#6 blows compression thur valve#6 will not idle not sure what you are asking, you found the problem ....the valve is not seated properly in its seat or the edge of the valve is ...

from polaris sportsman etx blue fire What kind of seat? A valve seat? If so, you will have to remove the affected cylinder head first, then remove the valve. Those valve seats are pressed in, you know

...valve seats with hard stellite seats designed for unleaded fuel, run Avgas (aviation leaded fuel) or run unleaded fuel until you start having compression or smoking issues then replace the valves and ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Plumbing Experts

john h

Level 3 Expert

29492 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66759 Answers

Are you a Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...