Questions & Answers for: Ford Bronco valve burnt

1987 bronco will not start The only way I can start my bronco is by jumping the starter solenoid(touching a screw driver on the 2 bolts) I have put a new starter in, have replaced the solenoid 3 times

1994 Bronco Egr valve doesnt fit into new ****** headers I just bought new headers for my 1994 Ford Bronco with 5.8L. There is not a place for the EGR valve connection in the headers and i wanted to ...

trying to replace the valve cover gasket on the passenger of my 1987 ford bronco and cannot seem to get to it? trying to replace the valve cover gasket on the passanger side of my 1987 ford bronco 302

...told it has a blown head gasket but no water in the oil and the engine does not smoke. maybe I hear valves rattling, possibly a lifter, but really no power, had a hard time coming home it is a 5 spd. ...

can't find where the pcv valve goes on a 1990 Ford Bronco II, PVC VALVE SHOULD BE ON VALVE COVER OR ROCKER ARM COVER.

motor runs like its only on half the cylinders shakes and wables if it ran the same both ways look at the timming, It has to be off, Or a burnt valve

...the carburator that came off of another 302 bronco, and i capted off some of the vacuume hoses, the valve air breather filter did fall apart and i was thinking if it clogged my valves. what could it ...

headlights, emergency flashers and turn signals are not working on my 1995 Ford Bronco. Just replaced the battery and this is the first time I have encountered this problem. Check your fuses. Under ...

how do i fix a code 33 insufficient egr flow first thing you should do is determine if the valve has vacuum to it start the engine unplug the vacuum line located on top of the valve place your ...

burnt oil smell when driving 96 ford bronco when driving this vehicle there is an unexplained burnt oil smell. Not sure where its coming from. leaking valve cover gaskets