Questions & Answers for: Schlage user code

user manual, and I cannot remember my 6 digit programming code. How can I restore the lock and set a new code? look on the sticker located inside the outer panelo on the lock. you are going to need to

...user code?? So I think I might have to clear the memory and start over but, can't find this info on the Schlage website. Schlage instruction video here: ...

...user codes. I have changed the code but the old one still works when punched in. How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back ...

...user code, then turn the dial.To enable/disable this feature, enter your Programming Code--press the Schlage butt0n--Press 7.Each time you do this, you toggle between enabled and disabled."How can I ...

...code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of. ...

...code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of. ...

...user code by pressing the corrosponding numbers".. however.. With the door open test the lock function Press the Schlage button.. this should extend the bolt Next Enter one of the two supplied ...

...user code, then turn the dial. So either way, you still have to turn the dial.To enable/disable this feature, enter your Programming Code --press Schlage button--press 7Each time you do this, you ...

...code Add User code: Press PC, Press Schlage, Press 1, enter new user code, repeat new user code, Function completed! Delete user code: Press PC, Press Schlage, Press 2, enter unwanted user code, ...

...Code, as well as both User codes are not readable inside the lock itself, but the bar scan is still good, is there a way I can still find my 6 digit code, or create a new one? ...