Questions & Answers for: unscrew using drill

...unscrew the battery cover using some pressure as well. 2) In case if the groove is stripped completely, you will have to drill two small holes into the battery cover. Drill them 1mm from the battery ...

...unscrew anything with power the chuck comes unscrewed. How do I fix it? Put a drop of locktite on the threads reinstall and let cure. Try this. Open chuck as wide as possible using a flashlight look ...

...unscrew? right or left hand screw??? if this is a cordless drill please review the tip section, if not the spindle has a hex that you can put a thin wrench on and the threads are standard meaning you ...

...unscrew the front of the drill to insert my drill bit. It is is just soo tight & not sure how this has happened! Can you help in how i can unscrew please Thanks If this model has a keyless chuck ...

drill is reversible. So undo the screw and then you should be able to unscrew the chuck. But I am not sure if it will be easy to unscrew. With a keyed chuck you use the key and a hammer to unscrew the

...drill jobs or for screw / unscrew jobs.The higher the number the strongest power of the drill will do.Often for drill purpose the higher number is set to obtain the maximum power of the drill.But if ...

...drill. It is a "Defiance by Stanley" model # 1221. I unscrewed the chuck, put in a bit, and drilled several small holes. Today when I tried to change the bit, I had no luck unscrewing the ...

drill is reversible. So undo the screw and then you should be able to unscrew the chuck. But I am not sure if it will be easy to unscrew. With a keyed chuck you use the key and a hammer to unscrew the

...unscrew the chuck. One model of drill has a tiny hole that you insert a nail into to remove the chuck. Many electric drills have threads on the end of the motor shaft to allow the chuck to be ******* ...

...unscrew unless I manually make the first turn or two. Try another known good fully charged battery. That's assuming you haven't stripped the head out of the screw or the driver bit itself isn't ...