Questions & Answers for: Pontiac G6 unlock ignition

Question about 2006 G6

1 Answer

...unlock position, cycle the ignition ON, OFF, ON, OFF. Release the door unlock switch. The doors will lock and unlock to confirm the program mode. Press and hold the LOCK button and the UNLOCK button ...

Ad

Question about 2006 G6

4 Answers

...UNLOCK buttons simultaneously for 14 seconds. Repeat step 8 in order to program each additional transmitter. Remove the ignition key from the ignition lock cylinder. Install the MALL PGM fuse back ...

Ad

...UNLOCK buttons simultaneously for 14 seconds. Repeat the previous step on each additional transmitter to be programmed. Remove the ignition key from the ignition lock cylinder. Install the BCM PRGRM ...

Question about 2006 G6

3 Answers

...Unlock" button that makes contact with the circuit board was wearing off. I got another fob from a friend, it worked for about a year and then the same problem. The semi-conductive coating was worn ...

Question about 2006 G6

1 Answer

...unlock the car but when I try to start it remortly, the ignition goes not but the vehicle won't start. can you tell me how I can get this fix and how much is going to cost me? Thank you. it seems to ...

Question about 2006 G6

1 Answer

...unlock the doors. We took it in to a shop a few months ago, and they replaced the fuse box and it was working perfectly again. All of a sudden today, the same old problems are coming back. Clock is ...

Question about 2006 G6

1 Answer

...unlock the doors. If a key is inserted into the ignition, and that key is not programmed into the computer, the computer shuts the engine down and car will not crank, and if I remember correcty, when ...

Question about 2005 G6

1 Answer

settings on the radio and change it to RKE. The alarm will beep when you unlock the doors via your keys but stop once you turn the ignition on, the alarm will not arm unless you lock your doors either

...UNLOCK remote buttons on first remote transmitter simultaneously for 15 seconds. Wait for acoustic signal (indicates correct programming). Repeat above procedure to program remaining remote ...

...unlock themselves automatically. so today i took her in and unplugged the main blue connector which provides power to the fuse box so i could clean it and put it back. As i put it back, first time, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2006 Pontiac G6
2006 Pontiac G6

1,332 Questions

2005 Pontiac G6
2005 Pontiac G6

423 Questions

2009 Pontiac G6
2009 Pontiac G6

172 Questions

2008 Pontiac G6
2008 Pontiac G6

174 Questions

Manuals & User Guides

Loading...