Questions & Answers for: Chevrolet Silverado 1500 unlock ignition

...unlock position, cycle the ignition ON, OFF, ON, OFF. Release the DOOR unlock switch. The doors will lock and unlock to confirm the program mode. Press and hold the LOCK button and the UNLOCK button ...

...unlock & open the doors and start the ignition. Today I unlocked the door put the key in the ignition and turned it but got nothing. I have full electric everything and all works. Battery tests ...

...ignition. 3) Hold down the power UNLOCK button on the driver?s door panel-continue to hold down until instructed to release in step 9. 4) Perform steps 5 through 8 in fairly rapid succession. 5) Turn ...

...ignition 3. Hold down the power UNLOCK button on the driver's door panel, continue to hold down until instructed to release in step 9. 4. Perform steps 5 through 8 in a fairly rapid succession. 5. ...

...wheel is locked. You need to try and pull the wheel as hard as you can to the left or right depending on how it is locked and try to turn the key at the same time. This should unlock the

ignition and hit the unlock botton on the controler itself but wy window was ajar about an inch.It witt not unlock with the keys in the ignition..........The only other solution is to take the Vin# of

...IGNITION MUST BE ON FOR THIS WIRE TO TEST Reverse Lights DARK BLUE (+) AT BCM MODULE UNDER DRIVER DASH Horn TAN (-) IN HARNESS AT STEERING COLUMN ALSO AT BCM MODULE UNDER DRIVER DASH Modules WIRE ...

ignition, hold door unlock button while i turn the key on and off twice. The doors do lock then unlock letting me know its in program mode, but it does not do anything after i hold the unlock and lock

...ignition yet. 5. Hold down on the unlock button on the door panel. Do not let up. 6. Turn the key to ON, OFF, ON, OFF (while still holding the unlock button on the door panel). 7. Release the unlock ...

...ignition. I was able to push on both unlock buttons with a thick wire but still won't unlock. Any help would be appreciated. Your vehicle came with 3 keys, just use one of the other keys. If you only ...