Question about Ultima WF860 Front Load Washer
...spin cycle has done this from day one any tips in keeping it closed poss uneven floor try adjusting the feet at the front could be uneven but could allso be door catch not locking properly or needs ...
spin and eventually the UE (uneven load light comes on) The machine is only a couple of years old. What's the problem?? You have an uneven load... ( not kidding here).. If you remove and/or reposition
Shaking and Spinning Unevenly Cleaning the drain valve will stop it from shaking violently and spinning unevenly? I don't have a front lower panel to take of to get to the drain valve. Beneath the ...
...spin These front loaders are have sensores for load balance.. If th load is uneven at the time of spin - it will not spin.. Try it with nothing in it.. If it spins - that was the issue.. Good luck
...spin probably the uneven load sensing system must have sensed your drum wobbles too much during spin cycle and cut off spin. its a safety system to avoid damage. Or if your machine has "spin stop" ...
...uneven Cotton Load spin cycle My Kenmore top-load washer is 20 years old and is operating well...except, the spin cycle for cottons seems to be unbalanced. I try to re-distribute the load, but it ...
...uneven but not as bad. Need help. If you find no problems with the suspension rods and springs, you can remove that spin basket and check for an item that could be stuck between the spin basket and ...
...machine.uneven spinning is usually down to machine spin at high speed when water isn't draining off clothes hence the weight is more uneven and causes the drum to hit against internal
...uneven if it is a front loading machine, the drum is held in place by a bunch of mini shock absorbers. If one of them is bad or broken it will spin unevenly. There are usually 8 shocks, 4 on the ...
Question about LSR6232J Top Load Washer
...the load is evenly balanced in the drum. If the load is unbalanced, it can cause the drum to spin unevenly, which could trip the electricity. Check the motor: If the motor is not functioning ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions