Questions & Answers for: unable to idle

Ad

Question about

1 Answer

Rpm

...unable to get a idle speed of 850+/-5% when at temp idle speed is 1400revs renault espace 2.2 petrol 1995 auto check your voltage readinf for you tpi sensor it should be a value of 0.0_ on the output ...

Ad

...idle off choke/unable to locate idle control screw. you may need to replace your spark plugs as the idle should remain constant as long as the tune of the bike is good IE oil changes done regularly / ...

Ad

...idle then run full throttle and do the same for it, get highest rpm then turn out 1/8 more on the high jet. Page 16 is best I can find. ...

down and stills out at stops i have a broken ''3 wire oxzgen sensor''.....would that make the car run erractic Yes. Sensor feedback to the computer is bad, so computer unable to control the idle speed

Question about 1996 Explorer

1 Answer

...idle air control motor may be dirty and unable to seat itself. check the throttle body plate for black gunk on it. this is behind the big fat hose where it connects to the engine from the air filter ...

Question about 1996 Explorer

1 Answer

...idle, replaced iac valve, temp sensor, tps, complete tune up, checked vacuum leaks (unable to detect any leaks) and its still idling high and check engine light is on, new fuel filter. PLEASE HELP. ...

...the idle air valve may be unable to seat so it is searching and needs cleaning. use a carb cleaner that is safe for throttle plates. and use your finger to rub around the plate to clean the gunk ...

Question about 017 018 Ms170 Ms180 Chainsaw Starter Stbx759

1 Answer

chainsaw blade rotating when idling no adjustment left on carb. adjusting screw. Am unable to prevent blade rotating when idling without applying brake. Engine seems overrevving when idling. Could be ...

Question about 017 018 Ms170 Ms180 Chainsaw Starter Stbx759

1 Answer

unable to hold any mid range rpm,car is controlable from idle to about 1500 but any further small accelerator input causes the rpm to rise to max so unable to do emissions check for mot. Your throttle

Question about 017 018 Ms170 Ms180 Chainsaw Starter Stbx759

1 Answer

Idle is very high and unable to adjust down. You have not said what machine we are talking about, however most idle screws work against the throttle spindle, so the more you screw it in the further it

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...