Questions & Answers for: Mitsubishi Outlander tyre wear wheel alignment

Ad

Question about Mitsubishi Outlander

1 Answer

...tyre pressures had the tracking done by lazer.changed one front wheel bearing checked all the joints for wear or play still nothing any help would be appreciated by the way its only done 70000 miles ...

Ad

Question about 2006 Outlander

1 Answer

...wheel alignment specs of my mitsubishi outlander 2004 model, my front tires are unevenly worh out. I would appreciate the help and info you can give... thanks, jeffrox Hi,the only way to correct this ...

Ad

Question about 2006 Outlander

1 Answer

...outside edge, when rounding roundabout fishtails very easily to left when wet, tyre squeals in the dry. Is this common or is wheel/axle out of align. tyres to big or suspension leaning ...

Question about 2003 Outlander

5 Answers

...tyre condition? you have obviously had the tracking checked? If all these are o.k. maybe a Brake caliper is binding slightly on the nearside wheel? Good luck! Hope this sorts it for you? press the ...

...wheel alignment and make sure to get the print out from the alignment machine. A good alignment starts with ride height measure, and rear wheels are adjusted first. When you read the printout, make ...

2003 mitsubishi outlander rear tires tilt in 2003 mitsubishi outlander rear tires tilt i. Causes the tire to wear quickly on inside. What can be causing this and how can it be repaired Had a similar ...

...tyre wear. 2004 mitsubishi outander. Both rear wheels tilting, causing extreme tyre wear on the inside (exactly same both sides)- brand new tyres worn through to the wires after only 2000 miles. ...

...wear. I had a 4 wheel alignment 13 days ago, however after the alignment, I was told they had an old machine with no printoutavailable, so I dont have a benchmark to what I started with. They (The ...

...only occurs when I press the brake and turn the wheel. It happens very intermittently and I never know when. Any ideas? Have the front brake pads checked for wear and also have the CV joints

...wear. Even a slightly loose ball joint or bushing needs to be replaced before such an alignment is done. Shops are notorious for shabby work nowadays and it is so hard to find a decent mechanic to do ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...