Questions & Answers for: Chrysler Town & Country tyre wear wheel alignment

Sliding vehicle When I'm driving my 1999 Chrysler Town & Country in the rain, the vehicle slides when I hit my brakes. I have replaced the front and back brake pads. Also, I even replaced the rollers ...

wear-wheel balance needed if visibly ok-have a wheel alignment after a tyre rotation-best even tyres to be put on fronts-they will carry out a safety check all suspension and steering before doing the

...towards the wheel balance being off balance usually happens if a weight has fallen off or the tyres been changed so get the balance checked at anywhere the replaces tyres. They wont charge much ...

...wheel alignment also, then , necessary? Yea I know what your saying. The dealer actually has a Service Bulletin that says to send the car to a body shop where they put a cap on it and rivit in place. ...

wear. Alignment specs? Caster should be +1.3degrees to+3.3degrees Camber -.3degrees to +.5degrees I would recommend myself that the Camber be set at -.1degree to +.2 degrees.Toe should be 1/16th of an

...1/4 inch or so ,if you can the belt needs changingalso with the engine runing see if the belts lined up with the pulleys.this will tell you if you have play or out of alignment/wear on the ...

...wheel that did not work. I've stepped on the breaks and tried pulling on the shifter arm while trying to turn it. I even unplugged the battery to see if it had a theft power issue. Nothing ...

steering pulls to the right could be low tire pressure, brake pads, wheel alignment, or the right side tires are worn more than the left. most likely you need an alignment.

My 2000 Chrysler town and country at 50mph the steering will shake. Check wheels for balance and check wheel bearings for wear

...going on a highway but does not ? several possibilities but most likely: 1. alignment 2. bubble in tire 3. steering damper 4. wheel bearings all worth having a knowledgeable person check it for ...