Questions & Answers for: Chrysler tyre wear wheel alignment

wear of tyres I actually had this same problem with mine and my right front wheel came off. I had had my tires rotated and they had'nt tightened the lug nuts properly. They need to be tightened twice.

...on turns or braking going downhill. Just had new brakes and rotors done. Chrysler 300m, 2003 Check tyres for bad wear or flat

wear-wheel balance needed if visibly ok-have a wheel alignment after a tyre rotation-best even tyres to be put on fronts-they will carry out a safety check all suspension and steering before doing the

...tyre wear you will also need to have the front wheels re-aligned. If a front wheel alignment was not done on the car in the last 12000 miles it will need a wheel alignment in any event. Cheers Sean ...

...wear and replace if worn. Once replaced have the car wheels aligned to ensure the job has been done right. Thank you fo using fixya and be safe hi 5this could be a couple of things, first one to look ...

...tyre pressures on your front tyres. If so and they are good then you need to check that you have not bent something on your steering. The best way to do this is put the car on your driveway make sure ...

...You only do 4 wheel alignment No other type alignment Of coarse it is all four wheels You shouldn't need any alignment for 10 years, if you have no tire wear or worn parts or hit any thing or big ...

...tyre noise come from wheel alignment out and the tread pattern on the tyres . Have a wheel alignment done starting on the rear end first as it affects the front alignment.. Check CV joints and wheel ...

wear on the inside of the tire only? this is from suspension bushes worn out , weak springs and wheels out of alignment. It is essential that the rear suspension be repaired and a rear wheel alignment

wear or misalignment, worn shock absorbers and even binding brakes or warped brake discs. The rear wheels and tyres and suspension and brakes are also important for a smooth ride and could conceivably